[ { "role": "user", "content": "I%20am%20using%20Terabite%20image%20for%20window%20version%204.1%20But%20when%20I%20make%20a%20wwinre%20usb%20drive%20with%20narrator%20support%2C%20but%20when%20I%20boot%20the%20environment%20it%20runs%20the%20terabite%20winre%2C%20but%20no%20narrator" }, { "role": "assistant", "content": "If Narrator isn't working in your TeraByte WinRE/PE build, even though you enabled the option, there are several possible reasons. Here's a breakdown of what to check and how to fix it.\n\n---\n\n## What \u201cNarrator support\u201d in TBWinRE means\n\nWhen you build a TBWinRE (TeraByte Windows Recovery Environment) drive, there\u2019s an option in the builder\u2019s configuration called **AccessibilityOpts**, which lets you enable accessibility tools:\n\n- `0` = No accessibility programs on startup \n- `1` = Run Narrator \n- `2` = Run On-Screen Keyboard (OSK) \n- `3` = Run both Narrator + OSK ([terabyteunlimited.com](https://www.terabyteunlimited.com/de/howto/tbwinrecmd_tutorial/?utm_source=openai))\n\nThe documentation states that Narrator support in TBWinRE **is only available if the build is based on Windows 10 version 1703 or later**. ([terabyteunlimited.com](https://www.terabyteunlimited.com/de/howto/tbwinrecmd_tutorial/?utm_source=openai))\n\n---\n\n## Why Narrator might not be running\n\nHere are common reasons it doesn\u2019t activate even though it\u2019s been enabled:\n\n1. **Too old WinRE source version** \n If your WinRE build is older than Windows 10 version 1703 (for example WinRE from Windows 8.x, or an earlier Windows 10), Narrator support won\u2019t be included. With TeraByte\u2019s \u201cAccessibilityOpts\u201d option, Narrator works only on WinRE builds from 1703 or newer. ([terabyteunlimited.com](https://www.terabyteunlimited.com/de/howto/tbwinrecmd_tutorial/?utm_source=openai))\n\n2. **Incorrect build configuration** \n Even if Narrator is enabled in the options, some settings or build types may override that or disable it. For example, the TBWinRE build mode must allow \u201cAccessibilityOpts\u201d and must be properly based on WinRE (not a pure WinPE mode with limited support). Also, it\u2019s recommended to build from WinRE **on a system where WinRE is functional**. ([terabyteunlimited.com](https://www.terabyteunlimited.com/pl/howto/tbwinre_tutorial/?utm_source=openai))\n\n3. **Missing components in the WinRE image** \n The WinRE WIM (Windows Recovery Image) must include the necessary speech/TTS components for Narrator. If those optional features or language packs aren\u2019t present, the Narrator may start but do nothing audible\u2014or fail to start at all. Customizing WinRE with DISM could help. ([learn.microsoft.com](https://learn.microsoft.com/en-us/windows-hardware/manufacture/desktop/customize-windows-re?view=windows-11&utm_source=openai))\n\n4. **USB drive boot layout or driver compatibility issues** \n Sometimes, when booting from USB, drivers or accessibility components might not load properly (for sound, keyboard, etc.). If audio drivers are missing or if the USB stick isn\u2019t recognized fully in WinRE, there will be no sound. Always use the recommended USB partition layout in TBWinRE Builder. ([terabyteunlimited.com](https://www.terabyteunlimited.com/pl/howto/tbwinre_tutorial/?utm_source=openai))\n\n---\n\n## How to fix it\n\nHere are steps to troubleshoot and get Narrator working:\n\n1. **Check your WinRE version** \n - Boot into Windows, open PowerShell (Admin). \n - Use the Microsoft method to verify WinRE version (`Get-WinREVersion` script or `DISM /Online /Get-REImageInfo`) to see which version you\u2019re using. If it's older than 1703, that\u2019s likely the cause. ([support.microsoft.com](https://support.microsoft.com/en-us/topic/methods-to-verify-the-winre-version-installed-46d08ea2-07a8-4fa8-9228-2404955a30aa?utm_source=openai))\n\n2. **Rebuild with Narrator enabled** \n - Run TBWinPE/RE Builder again. \n - Choose **TBWinRE** mode. \n - In the configuration for build settings, ensure `AccessibilityOpts` is set to **1** (or **3** if you want OSK too). ([terabyteunlimited.com](https://www.terabyteunlimited.com/de/howto/tbwinrecmd_tutorial/?utm_source=openai)) \n - Make sure the WinRE image source you're using is version 1703 or later.\n\n3. **Include required packages/components** \n - Use DISM to add speech/text-to-speech components, and language speech packages if Narrator uses them. \n - If needed, mount the WinRE image and check that audio/speech-TTS DLLs are present. Use Microsoft\u2019s guidance on customizing WinRE. ([learn.microsoft.com](https://learn.microsoft.com/en-us/windows-hardware/manufacture/desktop/customize-windows-re?view=windows-11&utm_source=openai))\n\n4. **Test accessibility after booting** \n - After booting via USB with the rebuilt TBWinRE, use key combinations\u2014**Ctrl + Windows Key + Enter** should trigger Narrator in WinRE. \n - Check whether sound device works (e.g. try playing a tone if possible, or see if volume settings are available). If there\u2019s no sound driver, Narrator may be \u201crunning\u201d but no audio is heard.\n\n5. **Verify the USB build method/layout** \n - Use the **Partition USB Layout** option in TBWinRE Builder to ensure the USB is correctly formatted so WinRE boots fully and correctly recognizes hardware. ([terabyteunlimited.com](https://www.terabyteunlimited.com/pl/howto/tbwinre_tutorial/?utm_source=openai)) \n - Confirm you aren't in a \u201cNo Partition\u201d mode if that causes booting problems. ([terabyteunlimited.com](https://www.terabyteunlimited.com/pl/howto/tbwinre_tutorial/?utm_source=openai))\n\n---\n\nIf you like, I can walk you through rebuilding your TBWinRE step-by-step to ensure Narrator will work (based on your current Windows version). Do you want to try that?" }, { "role": "user", "content": "yes%20please" }, { "role": "assistant", "content": "Here\u2019s a clear step-by-step guide to rebuilding your TBWinRE so that Narrator works correctly. Let\u2019s confirm version compatibility, set up the builder correctly, and test the result. I\u2019ll walk you through all the necessary checks and build settings.\n\n---\n\n## Step 1: Check WinRE Version \u2014 Must Be Windows 10 1703 or Newer\n\nNarrator support in TBWinRE is **only available** if the WinRE source is **Windows 10 version 1703 or later**. If your WinRE is older, Narrator won\u2019t run. ([terabyteunlimited.com](https://www.terabyteunlimited.com/de/howto/tbwinrecmd_tutorial/?utm_source=openai))\n\nTo verify:\n\n1. Open Command Prompt or PowerShell *as Administrator*.\n2. Run: \n `reagentc /info` \n This shows where WinRE is located and in many cases its version. \n3. To check the WIM file version, locate `winre.wim` (usually in `C:\\Windows\\System32\\Recovery\\`) and run: \n `Dism /Get-ImageInfo /ImageFile:\"\\winre.wim\" /index:1` \n Look for a version like **10.0.15063.x** or greater (15063 is 1703 build) to confirm. Alternatively, use Microsoft\u2019s script: `GetWinReVersion.ps1`. ([support.microsoft.com](https://support.microsoft.com/en-US/servicing/os/windows/winre/2024/11/kb5048239-windows-recovery-environment-update-for-windows-10-version-21h2-and-22h2-november-12-2024?utm_source=openai))\n\nIf version is older than Windows 10 1703, you\u2019ll need to update the WinRE image or use a newer version to build TBWinRE with Narrator.\n\n---\n\n## Step 2: Prepare Latest TBWinPE/RE Builder & Image for Windows\n\nMake sure your tools are current:\n\n- You need **TBWinPE/RE Builder v1.38 or newer** for Windows 10/11 builds. ([terabyteunlimited.com](https://www.terabyteunlimited.com/pl/howto/tbwinre_tutorial/?utm_source=openai)) \n- **Image for Windows version 2.95 or later** must be installed for TBWinRE builds. ([terabyteunlimited.com](https://www.terabyteunlimited.com/pl/howto/tbwinre_tutorial/?utm_source=openai))\n\nIf you have older versions, update them before proceeding.\n\n---\n\n## Step 3: Configure Build Settings \u2013 Enable Narrator\n\nWhen using **TBWinPE/RE Builder**, open it and do the following:\n\n1. On the **Project Type** screen, select **TBWinRE** mode. ([terabyteunlimited.com](https://www.terabyteunlimited.com/pl/howto/tbwinre_tutorial/?utm_source=openai)) \n2. Click **Settings\u2026** to open the settings window. ([terabyteunlimited.com](https://www.terabyteunlimited.com/hu/howto/builder_settings/?utm_source=openai)) \n3. Under the **TBLauncher** or **Build Options** section, find the control called `AccessibilityOpts`. Set it to one of the following:\n - `1` = Run **Narrator** on startup\n - `2` = Run On-Screen Keyboard (OSK)\n - `3` = Run both Narrator + OSK on startup ([terabyteunlimited.com](https://www.terabyteunlimited.com/de/howto/tbwinrecmd_tutorial/?utm_source=openai))\n\n4. Make sure the WinRE source that the builder will use is version 1703+ (see step 1). You can choose:\n - *Installed WinRE* (recommended) \n - Or select a WinRE WIM file manually if needed \n Use the \u201cWinRE Source\u201d setting in the Builder\u2019s settings. ([terabyteunlimited.com](https://www.terabyteunlimited.com/hu/howto/builder_settings/?utm_source=openai))\n\n5. Check that audio/speech components are included:\n - In the \u201cLanguage\u201d or \u201cWinRE Packages\u201d section, include speech or text-to-speech packages for your language if they\u2019re optional. Some TTS features aren\u2019t in the base image.\n\n---\n\n## Step 4: Build the TBWinRE Boot Media or Update Installed WinRE\n\nOnce everything is set:\n\n- Use **Create TBWinRE USB Flash Drive (UFD)** to make bootable media, or \n- Use **Modify the Installed WinRE** option to embed TBWinRE (including Narrator) into the existing recovery partition. ([terabyteunlimited.com](https://www.terabyteunlimited.com/kb/kb-articles/tbwinpe-re-builder-build-modes-types/?utm_source=openai))\n\nAllow the build process to complete fully, without skipping any optional component warnings unless you handle them manually.\n\n---\n\n## Step 5: Test Narrator in the Recovery Environment\n\nAfter creating your boot media or updating WinRE:\n\n1. Boot from the USB or enter recovery environment (e.g. Shift + Restart on Windows 10/11). \n2. Use **Ctrl + Win + Enter** \u2013 the standard key combination to activate Narrator. \n It should also start automatically if you set `AccessibilityOpts = 1` or `3`. ([terabyteunlimited.com](https://www.terabyteunlimited.com/hu/howto/builder_settings/?utm_source=openai))\n\n3. Check if you can hear speech. If there\u2019s no sound, possible issues:\n - Audio/sound driver isn\u2019t loading in the recovery environment. Try adding proper drivers using the **Drivers** folder in TBWinRE Builder. ([terabyteunlimited.com](https://www.terabyteunlimited.com/pl/howto/tbwinre_tutorial/?utm_source=openai)) \n - The speech/TTS package or voice language pack isn\u2019t present in the WIM. Add missing MSU or language packages. ([learn.microsoft.com](https://learn.microsoft.com/en-us/windows-hardware/manufacture/desktop/windows-recovery-environment--windows-re--technical-reference?view=windows-11&utm_source=openai))\n\n---\n\nIf you want, I can look up what your specific WinRE version is (just give me your Windows version or `reagentc /info` output), and I\u2019ll tell you exactly whether your build supports Narrator, and what you need to add. Do you want me to analyze your current setup?" }, { "role": "user", "content": "Should%20I%20use%20make%20windows%20disk%20or%20uefi%20disk%20my%20machine%20is%20UEFI" }, { "role": "assistant", "content": "Since your machine is UEFI-based, yes, you should use a **UEFI USB bootable disk** when building TBWinRE. Here\u2019s why, how TBWinRE supports it, and what options/settings to choose to do it right.\n\n---\n\n## Why You Should Use UEFI Boot Mode\n\nUsing UEFI (Unified Extensible Firmware Interface) offers several advantages over Legacy BIOS/MBR mode:\n\n- **Boot Compatibility**: UEFI requires the disk to be formatted with GPT (GUID Partition Table). If you boot in UEFI, the BIOS expects to find an EFI System Partition (ESP) with a relevant `.efi` boot loader file. If your USB is set up for legacy BIOS (MBR), it may not boot in UEFI mode. ([learn.microsoft.com](https://learn.microsoft.com/sv-se/windows-hardware/manufacture/desktop/windows-setup-installing-using-the-mbr-or-gpt-partition-style?view=windows-11&utm_source=openai))\n\n- **Features Like Secure Boot**: UEFI supports features like Secure Boot and faster boot times. If you plan to use those, you need UEFI boot media. \u2714\n\n- **TBWinRE Support**: TeraByte\u2019s builder supports creating UEFI-compatible boot media. Specifically, their \u201cGPT Drives\u201d setup lets you put a FAT32 EFI System Partition on a USB that works in UEFI mode. ([terabyteunlimited.com](https://www.terabyteunlimited.com/kb/kb-articles/tbwinpe-re-builder-build-modes-types/?utm_source=openai))\n\nSo since your machine already uses UEFI firmware, building a UEFI disk ensures compatibility, faster booting, possibly better driver loading, and better access to features like Narrator and Secure Boot (where applicable).\n\n---\n\n## How TBWinRE Supports UEFI Boot\n\nHere are the key features you\u2019ll want in TBWinRE to make sure your boot media works under UEFI:\n\n- **GPT partition style** on USB (instead of MBR) so firmware recognizes it in UEFI mode. \n- **EFI System Partition (ESP)**: a small FAT32 partition (typically ~100\u2013300 MB) where the UEFI `.efi` boot files are stored. \n- **BOOTFILE program (TBOSDT / bootfile.exe/bootfile64.exe)**: this tool helps set up EFI boot support on the USB media. ([terabyteunlimited.com](https://www.terabyteunlimited.com/kb/kb-articles/tbwinpe-re-builder-build-modes-types/?utm_source=openai)) \n- **TBWinRE build mode** supports GPT/UEFI when you choose the appropriate layout in \u201cPartition USB Layout\u201d during build. ([terabyteunlimited.com](https://www.terabyteunlimited.com/pl/howto/tbwinre_tutorial/?utm_source=openai))\n\n---\n\n## How to Configure TBWinRE for UEFI\n\nHere are specific settings to use when building your TBWinRE media for UEFI:\n\n1. **Select \u201cUSB Flash Drive (UFD)\u201d build type**, not CD/DVD or ISO (USB will boot from most UEFI systems reliably). \n2. In TBWinPE/RE Builder, choose a GPT layout for the USB drive:\n\n - Use the **Partition USB Layout** option \u2014 select a layout with FAT32 EFI partition for the ESP. This lets the drive be recognized by the UEFI firmware. ([terabyteunlimited.com](https://www.terabyteunlimited.com/pl/howto/tbwinre_tutorial/?utm_source=openai)) \n - Make sure it creates an ESP portion (FAT32) for the UEFI boot files, and the rest can be NTFS (if needed) to store TBWinRE files.\n\n3. Make sure **bootfile64.exe** / BOOTFILE program is being used to set up the `.efi` boot loader in the USB. TBWinPE/RE Builder uses these for GPT/UEFI booting. ([terabyteunlimited.com](https://www.terabyteunlimited.com/kb/kb-articles/tbwinpe-re-builder-build-modes-types/?utm_source=openai))\n\n4. If Secure Boot is enabled on your system, check whether TBWinRE supports Secure Boot. Sometimes you may have to temporarily disable Secure Boot or sign the bootloader to make it work. TBWinRE\u2019s documentation suggests that you can disable Secure Boot if needed. ([terabyteunlimited.com](https://www.terabyteunlimited.com/kb/kb-articles/using-terabyte-boot-media-on-uefi-systems/?utm_source=openai))\n\n---\n\n## What \u201cMake Windows Disk\u201d Means vs \u201cUEFI Disk\u201d\n\n- **Make Windows Disk** \u2013 often means creating a disk that can boot using Legacy BIOS or sometimes both Legacy + UEFI. Usually this means MBR or combination setups. \n- **UEFI Disk** \u2013 specifically formatted for UEFI boot, which means GPT partition style and including an ESP with an `.efi` boot loader.\n\nSince you already have a UEFI setup, you should lean toward creating a **UEFI disk** (GPT + ESP) to avoid compatibility problems.\n\n---\n\nIf you like, I can walk you through your specific TBWinRE build options and help pick the settings so it builds exactly the right UEFI disk for your machine. Do you want to go through that?" }, { "role": "user", "content": "yes%20please" }, { "role": "assistant", "content": "Here\u2019s how to set up your TBWinRE build so it's optimized for your UEFI machine. I\u2019ll explain which build modes to choose, how to lay out the USB partitions, and what settings matter most. These recommendations are based on the official TeraByte Unlimited documentation. ([terabyteunlimited.com](https://www.terabyteunlimited.com/pl/howto/tbwinre_tutorial/?utm_source=openai))\n\n---\n\n## Build Mode: USB Flash Drive (UFD) or Internal WinRE\n\nTBWinRE Builder gives you options for where and how the recovery environment lives:\n\n- **Create bootable USB Flash Drive (UFD), CD, or ISO** \u2014 this gives you standalone recovery media so you can directly boot off the USB or disc. ([terabyteunlimited.com](https://www.terabyteunlimited.com/pl/howto/tbwinre_tutorial/?utm_source=openai)) \n- **Modify the installed Windows Recovery Environment (WinRE)** \u2014 embed TBWinRE into your system's built-in recovery partition so you don't need external media. ([terabyteunlimited.com](https://www.terabyteunlimited.com/pl/howto/tbwinre_tutorial/?utm_source=openai)) \n\nSince your system is UEFI, for best flexibility, I recommend **building a USB Flash Drive** using the UFD option. That way you can boot from it during recovery, even if something goes wrong on the internal drive.\n\n---\n\n## USB Partition Layout: GPT + ESP Recommended\n\nTo make the USB boot under UEFI, here is how it should be set up:\n\n- Use a **GPT-style USB drive** (GUID Partition Table) instead of MBR when booting in UEFI mode. This ensures the firmware will recognize the drive correctly. ([terabyteunlimited.com](https://www.terabyteunlimited.com/downloads/ifw_en_manual.pdf?utm_source=openai)) \n- Create an **EFI System Partition (ESP)** \u2014 a small FAT32 partition (~100-300 MB is typical) to hold the `.efi` boot loader files. ([terabyteunlimited.com](https://www.terabyteunlimited.com/downloads/ifw_en_manual.pdf?utm_source=openai)) \n- Ensure your USB build uses a supported \u201cPartition USB Layout\u201d option in the TBWinRE Builder\u2019s wizard \u2014 one that includes an ESP. TB documentation says \u201cPartition USB Layout\u201d modes are preferred, and \u201cNo Partition Mode\u201d often leads to boot failures. ([terabyteunlimited.com](https://www.terabyteunlimited.com/pl/howto/tbwinre_tutorial/?utm_source=openai)) \n\n---\n\n## Key Builder Settings for UEFI and Accessibility\n\nWhen setting up TBWinRE Builder, here are the options that matter:\n\n| Setting | Value to select (UEFI-Ready) | Notes |\n|---------|-------------------------------|-------|\n| Build Type | **USB Flash Drive (UFD)** | This ensures you create external bootable media. ([terabyteunlimited.com](https://www.terabyteunlimited.com/pl/howto/tbwinre_tutorial/?utm_source=openai)) |\n| USB Layout | A layout that includes **FAT32 EFI System Partition** | This ensures UEFI firmware will locate and load the bootloader. ([terabyteunlimited.com](https://www.terabyteunlimited.com/pl/howto/tbwinre_tutorial/?utm_source=openai)) |\n| Partition Scheme | **GPT** | For UEFI boot, required. ([terabyteunlimited.com](https://www.terabyteunlimited.com/downloads/ifw_en_manual.pdf?utm_source=openai)) |\n| `AccessibilityOpts` | `1` (Narrator) or `3` (Narrator + OSK) if your WinRE source is **Windows 10 version 1703+** | If older than that, Narrator won't run. ([terabyteunlimited.com](https://www.terabyteunlimited.com/pl/howto/tbwinre_tutorial/?utm_source=openai)) |\n| Secure Boot Compatibility | Make sure TBWinRE build supports Secure Boot (often enabled by default if using Win 8/10/11 sources) | On many UEFI systems, Secure Boot is enabled. TBWinRE supports Secure Boot for media built from Win 8.x/10/11. ([terabyteunlimited.com](https://www.terabyteunlimited.com/downloads/ifw_en_manual.pdf?utm_source=openai)) |\n\n---\n\n## Post-Build: Firmware Settings & Testing\n\nAfter you build the USB drive, do this:\n\n1. **Check UEFI firmware boot order** (BIOS settings): make sure the USB is configured as a UEFI boot device. Some systems have separate entries for \u201cUSB (UEFI)\u201d vs \u201cUSB (Legacy)\u201d. Pick the UEFI version.\n\n2. **Test the boot**: Plug in the USB, reboot, and enter your BIOS or UEFI boot menu \u2014 select the USB entry. If it boots into TBWinRE, you're good. If not:\n - Check whether Secure Boot is blocking booting from unsigned loaders.\n - Verify that the ESP partition on the USB has the `.efi` files for booting.\n\n3. **Trigger Narrator**: \n - Use **Ctrl + Windows Key + Enter** after booting to check if Narrator starts. \n - Or try booting to see if Narrator starts automatically (if `AccessibilityOpts = 1` or `3`).\n\n4. **Hardware support**: Ensure audio drivers, USB drivers, etc., are included if required by your hardware. If USB ports or audio hardware don\u2019t load, Narrator may be silent. If needed, add drivers in the TBWinRE Builder settings (Drivers section). ([terabyteunlimited.com](https://www.terabyteunlimited.com/pl/howto/tbwinre_tutorial/?utm_source=openai))\n\n---\n\nIf you give me your Windows version and whether your WinRE image is version 1703+, I can tell you exactly which options to use for your situation." }, { "role": "user", "content": "i%27m%20using%20windows%2011%2064%20bit%2025%20H2" }, { "role": "assistant", "content": "Great \u2014 using Windows 11, 25H2 (64-bit) is very good news. That means your WinRE version is well beyond the minimum requirement for enabling Narrator and other modern features. Here are tailored recommendations for building TBWinRE on your specific setup, plus how to check that everything is aligned properly.\n\n---\n\n## What Your Windows 11 25H2 Means for WinRE Support\n\n- Your OS build number is something like **26200.xxx** for Windows 11 version 25H2. ([prajwaldesai.com](https://www.prajwaldesai.com/windows-11-updates-versions-build-numbers/?utm_source=openai)) \n- WinRE in 25H2 has received updates like **KB5070762**, which specifically addressed problems in WinRE (Windows Recovery Environment) *and* updated Safe OS dynamic content. ([support.microsoft.com](https://support.microsoft.com/en-us/servicing/os/windows/safeos-du/2025/10/kb5070762-safe-os-dynamic-out-of-band-update-for-windows-11-version-24h2-and-25h2-and-windows-server?utm_source=openai)) \n- That KB also fixed issues with USB keyboard/mouse input in WinRE, so your recovery environment is more usable for accessibility and input, which is good when using Narrator. ([support.microsoft.com](https://support.microsoft.com/en-us/servicing/os/windows/safeos-du/2025/10/kb5070762-safe-os-dynamic-out-of-band-update-for-windows-11-version-24h2-and-25h2-and-windows-server?utm_source=openai)) \n\nSo yes: your version meets or exceeds the Windows 10 v1703 threshold that Narrator requires, and subsequent patches have improved WinRE behavior.\n\n---\n\n## Which TBWinRE Build Settings to Use With Windows 11 25H2\n\nHere are specific settings to choose in TBWinRE Builder, tailored for your configuration:\n\n| Setting | Recommended Value / Selection | Notes |\n|---------|-------------------------------|-------|\n| WinRE source | Use the *installed* WinRE image from your 25H2 system (not an older WIM) | This ensures you get all the latest fixes and version. |\n| Build mode | **USB Flash Drive (UFD)** | For a clean external recovery option. |\n| Partition scheme / USB layout | **GPT** with a FAT32 **EFI System Partition (ESP)** | Ensures UEFI firmware can boot from it properly. |\n| Boot loader file | Ensure `.efi` boot files (`bootfile64.exe` or similar) are included | The `BOOTFILE` tool in the TBWinRE suite handles this. ([terabyteunlimited.com](https://www.terabyteunlimited.com/downloads/ifw_en_manual.pdf?utm_source=openai)) |\n| `AccessibilityOpts` | Set to either `1` (Narrator) or `3` (Narrator + On-Screen Keyboard) | Since your WinRE is modern, Narrator will work. |\n| Secure Boot | Keep Secure Boot enabled if possible; TBWinRE supports Secure Boot on Windows 8.x/10/11 sources. | If there are issues, you may need to disable Secure Boot temporarily. ([terabyteunlimited.com](https://www.terabyteunlimited.com/downloads/ifw_en_manual.pdf?utm_source=openai)) |\n\n---\n\n## Version Checks & Verifications You Should Do\n\nBefore and after building, verify these things to ensure everything works correctly:\n\n1. **Check current WinRE version** \n - Run `reagentc /info` (as admin) to find the location of your active WinRE WIM. \n - Then use `Dism /Get-ImageInfo /ImageFile:Path\\winre.wim /index:1` to see its version number. For Windows 11 25H2, it should report something like `10.0.26200.xxx`. \n - Confirm that \u201cService Pack Build\u201d or \u201cUBR\u201d is up to date \u2014 ideally reflecting recent patches like KB5070762. ([support.microsoft.com](https://support.microsoft.com/en-us/servicing/os/windows/safeos-du/2025/10/kb5070762-safe-os-dynamic-out-of-band-update-for-windows-11-version-24h2-and-25h2-and-windows-server?utm_source=openai)) \n\n2. **Make sure WinRE has required components** \n - Confirm that speech / text-to-speech (TTS) / voice tools for Narrator's language are part of the installed WinRE or can be added. \n - Also double-check that essential drivers (audio, USB etc.) are available in WinRE; if not, include them via TBWinRE Builder\u2019s driver settings.\n\n3. **Build TBWinRE with a UEFI-bootable USB** \n - Use GPT, create ESP partition (FAT32), include `.efi` boot files. \n - Use the `USB Flash Drive (UFD)` option; avoid \u201cNo Partition Mode\u201d or MBR-only layouts. \n - Set `AccessibilityOpts` as needed (see table above).\n\n4. **Test it** \n - Boot your machine in UEFI mode from the USB to make sure it shows up in your firmware\u2019s boot menu as a UEFI device. \n - When in recovery, press `Ctrl + Windows Key + Enter` to trigger Narrator. Or see if it starts automatically (if you set that), and if you hear speech. \n - Also test keyboard/mouse responsiveness inside WinRE (this was an issue before some of the updates) to ensure input works. \n\n---\n\nIf you want, I can help you identify the exact WinRE build you currently have (via commands you can run), and then we can confirm your settings together step by step before you build the media. Do you want to do that?" }, { "role": "user", "content": "yes%20please" }, { "role": "assistant", "content": "Here are the commands you should run *right now* on your Windows 11 25H2 system to check your current WinRE setup. I\u2019ll include what to look for in the output, and how to interpret it so you know whether you\u2019ll need to update anything before building your TBWinRE media.\n\n---\n\n## Step 1: Find the WinRE Image Location\n\nOpen an elevated Command Prompt or PowerShell (run as Administrator), then run:\n\n```\nreagentc /info\n```\n\nWhat you're looking for in the output:\n\n- **Windows RE status** \u2014 it should say *Enabled*.\n- **Windows RE location** \u2014 a path that shows where `winre.wim` is stored, often something like `\\\\?\\GLOBALROOT\\device\\harddisk0\\partitionX\\Recovery\\WindowsRE`. \n- **Windows RE Version** \u2014 a version number, e.g. `10.0.26100.8875` or similar. ([elevenforum.com](https://www.elevenforum.com/t/winre-version.48183/?utm_source=openai))\n\n---\n\n## Step 2: Check the WinRE Image Version\n\nOnce you have the location from `reagentc /info`, run this DISM command (replace the path with yours):\n\n```\nDism /Get-ImageInfo /ImageFile:\\\\?\\GLOBALROOT\\device\\harddisk0\\partition4\\Recovery\\WindowsRE\\winre.wim /index:1\n```\n\nThings to check for:\n\n- **Version** \u2014 looks like `10.0.xxxxx`\n- **ServicePack Build** \u2014 the last part (for example, `8875` in `26100.8875`) shows cumulative updates + UBR (Update Build Revision). If this number is relatively high, you're up to date. ([elevenforum.com](https://www.elevenforum.com/t/winre-version.48183/?utm_source=openai))\n\n---\n\n## Step 3: Interpret the Results\n\nHere\u2019s what to do depending on what you see:\n\n| What You See | What It Means | What To Do |\n|--------------|----------------|-------------|\n| RE status is **Enabled**, version number is high (close to your OS build or latest update UBR) | WinRE is up to date | You're good \u2014 you can proceed with TBWinRE build with all settings as we discussed (GPT, UEFI, Narrator enabled, etc.) |\n| RE status is **Disabled** or version is significantly older (much lower **ServicePack Build**) | WinRE is outdated or not properly configured | You should enable or update WinRE before building TBWinRE. Could involve copying a newer `winre.wim` from install media or applying Windows updates. ([elevenforum.com](https://www.elevenforum.com/t/winre-version.48183/?utm_source=openai)) |\n\n---\n\nIf you want, I can help you interpret **your** exact output once you run the commands. Just paste what `reagentc /info` and `DISM /Get-ImageInfo` show, and I\u2019ll tell you whether it's current or if you need fixes." } ]