[
    {
        "role": "user",
        "content": "When%20setting%20up%20the%20different%20nodes%20of%20the%20TP-Link%20BE65%20Pro%20how%20will%20I%20know%20if%20a%20specific%20location%20is%20suitable"
    },
    {
        "role": "assistant",
        "content": "Here\u2019s how you can tell whether a potential location is good for placing a TP-Link Deco BE65 Pro node (satellite) to get strong, reliable Wi-Fi coverage. Use these indicators to spot areas that are **suitable**, and remember that finding the best position usually involves a little testing and adjustment.\n\n---\n\n## 1. Signal Strength & Backhaul Link Quality\n\n- When a satellite node is connecting wirelessly to another Deco (the \u201csource\u201d node), check the *backhaul* signal strength. TP-Link suggests you should see at least **2 bars** when placing a satellite node via the Deco app. ([service-provider.tp-link.com](https://service-provider.tp-link.com/faq/495/?utm_source=openai))  \n- In general, RSSI (Receive Signal Strength Indicator) or \u201cLink Rate\u201d values can give you feedback. If these are too weak or low, the node location isn't great. You can test by walking around the desired area with a laptop or phone and checking its connection to the nearest node via the app or diagnostics. ([service-provider.tp-link.com](https://service-provider.tp-link.com/faq/807/?utm_source=openai))\n\n---\n\n## 2. Physical Placement\n\n- **Position height**: Nodes should be placed off the floor\u2014TP-Link recommends putting them around **1 to 1.5 feet (30-45 cm)** above floor level, ideally at similar height as the main node. ([service-provider.tp-link.com](https://service-provider.tp-link.com/faq/495/?utm_source=openai))  \n- **Central location**: Try to place the main and satellite nodes centrally to your layout, so coverage is even across rooms. Avoid locating a node against an exterior wall if possible. ([omadanetworks.com](https://www.omadanetworks.com/us/support/faq/455/?utm_source=openai))  \n- **Open space**: Keep nodes out in the open. Avoid placing them in cabinets, behind large furniture, or near metal objects. Solid walls, metal, thick materials reduce signal significantly. ([omadanetworks.com](https://www.omadanetworks.com/us/support/faq/455/?utm_source=openai))\n\n---\n\n## 3. Interference and Obstacles\n\n- Keep Deco nodes away from **high-power appliances** like microwaves, refrigerators, TVs, Bluetooth devices, or USB 3.0 ports\u2014they can interfere with certain bands (especially 2.4-GHz). ([omadanetworks.com](https://www.omadanetworks.com/us/support/faq/455/?utm_source=openai))  \n- Avoid placing nodes near large reflective or absorbent surfaces (metal, mirrors, concrete walls) or inside thick walls. Each obstruction reduces signal. Moving a node just a little bit around obstacles often makes a big difference. ([omadanetworks.com](https://www.omadanetworks.com/us/support/faq/455/?utm_source=openai))\n\n---\n\n## 4. Backhaul Options: Wired vs Wireless\n\n- If possible, using **Ethernet backhaul** between nodes gives more reliable speeds and less dependency on signal strength. If running Cat5e/Cat6 or better cables is feasible, that\u2019s often the best setup. ([service-provider.tp-link.com](https://service-provider.tp-link.com/faq/495/?utm_source=openai))  \n- If wireless backhaul is your only option, ensure the path between nodes is as direct and unobstructed as possible, and that the signal remains strong. ([service-provider.tp-link.com](https://service-provider.tp-link.com/faq/495/?utm_source=openai))\n\n---\n\n## 5. Coverage Area & Expected Performance\n\n- The Deco BE65 Pro provides very high speeds on 5 GHz and 6 GHz bands but has **strong signal attenuation on 6 GHz**, especially through walls or ceilings. So, for rooms far away or separated by multiple obstacles, performance will degrade\u2014ideally, nodes should have line of sight or minimal obstruction to each other. ([tomshardware.com](https://www.tomshardware.com/networking/routers/tp-link-deco-be65-pro-wi-fi-7-mesh-router-review?utm_source=openai))  \n- You should consider the total footprint: TP-Link claims up to **7,600 ft\u00b2** coverage for a full 3-node system under ideal conditions. ([tp-link.com](https://www.tp-link.com/uk/products/details/deco-be65-pro.html?utm_source=openai))  \n\n---\n\n## 6. LED Status & Feedback\n\n- Each node has an LED indicator. Once everything is set up, a **solid green** LED means everything is connected and working properly. If it\u2019s red or pulsing red/another color, something is wrong. ([device.report](https://device.report/manuals/deco-be65-pro-user-guide?utm_source=openai))  \n- The Deco app also provides status and feedback for each node\u2014if the node reports \u201cWeak Signal\u201d or the app doesn\u2019t show \u201cEverything Looks Good,\u201d try moving it. ([service-provider.tp-link.com](https://service-provider.tp-link.com/faq/495/?utm_source=openai))  \n\n---\n\nIf you want, I can help you figure out for your specific space (how many floors, rooms, materials in walls, etc.) where to put your BE65 Pro nodes to get the best coverage. Would you like me to walk through that?"
    },
    {
        "role": "user",
        "content": "yes%20please"
    },
    {
        "role": "assistant",
        "content": "Here\u2019s a customized plan to help you place your TP-Link Deco BE65 Pro nodes well to get strong, consistent Wi-Fi across your home. As you test out different locations, use these steps along with what you know about your house layout, building materials, and where you need good connectivity.\n\n---\n\n## A. Gather Key Details About Your Space\n\nBefore you move any nodes, map out or note:\n\n- How many floors, stairs, ceilings between floors\n- Wall types (drywall, brick, concrete), doors (wood/metal), windows, glass partitions\n- Large obstacles (metal appliances, mirrors, large furniture)\n- Where you need strong signal (living room, bedrooms, office, basement, backyard)\n- Whether past connectivity (Wi-Fi or wired) had \u201cdead zones\u201d or weak spots\n\nKnowing these helps decide how many nodes you need and rough spacing.\n\n---\n\n## B. Use a Coverage Goal Based on Node Capability\n\nFrom Tom\u2019s Hardware tests:\n\n- A 3-node BE65 Pro setup can cover up to ~ 7,600 ft\u00b2 **under ideal conditions**. ([tomshardware.com](https://www.tomshardware.com/networking/routers/tp-link-deco-be65-pro-wi-fi-7-mesh-router-review?utm_source=openai))\n- The BE65 Pro supports tri-band Wi-Fi 7 with speeds up to ~ 5.76 Gbps on 6 GHz, ~ 2.88 Gbps on 5 GHz and ~ 0.688 Gbps on 2.4 GHz. ([tp-link.com](https://www.tp-link.com/uk/home-networking/deco/deco-be65-pro/v1?utm_source=openai))  \n- 6 GHz band has high throughput but also high attenuation\u2014walls especially thick or dense materials (brick, concrete) and between floors reduce its range significantly. ([ursamajorlab.com](https://www.ursamajorlab.com/blog/wifi-signal-attenuation-wall-materials-2-4ghz-5ghz-6ghz/?utm_source=openai))\n\nUse that to set reasonable expectations: the 6 GHz band will shine in line-of-sight or with few obstructions; deeper behind walls or between floors, 5 GHz or 2.4 GHz will carry more load.\n\n---\n\n## C. Placement Strategy: Where to Put Each Node\n\nHere are practical guidelines for where each node should go:\n\n1. **Main node (Router) location**\n   - Central area close to where your ISP\u2019s modem comes in\n   - Open, elevated (around 1 ft or so off the floor), away from walls and metal objects. ([tp-link.com](https://www.tp-link.com/us/support/faq/1446/?utm_source=openai))\n\n2. **First satellite node**\n   - Place on same floor, roughly halfway between main node and a major usage area (e.g. bedrooms, living room far corner)\n   - Try to keep walls minimal, or at least not thick/solid block ones\n   - Test signal strength using the Deco app: you want **two bars or more** between main and satellite. ([tp-link.com](https://www.tp-link.com/us/support/faq/1446/?utm_source=openai))\n\n3. **Second satellite node (if needed)**\n   - If you have a second floor or a basement, put this node there\n   - Position it aligned vertically with the main node if possible to avoid signal going through multiple floors/ceilings\n   - Try to keep similar height, avoid ceiling-only mounting unless it is open or condo-style ceilings\n\n4. **Wired backhaul whenever possible**\n   - If Ethernet or powerline is practical, use it\u2014gives the best performance especially for inter-node communication. ([tp-link.com](https://www.tp-link.com/us/support/faq/1446/?utm_source=openai))\n\n---\n\n## D. Guidelines Based on Wall Types & Obstacles\n\n- Layers matter: one drywall is fairly minimal: some signal loss especially on 6 GHz, but not too bad. Two drywall + insulation + wood studs increase loss noticeably. ([ursamajorlab.com](https://www.ursamajorlab.com/blog/wifi-signal-attenuation-wall-materials-2-4ghz-5ghz-6ghz/?utm_source=openai))  \n- Brick, concrete, stone walls: large signal loss, especially on 6 GHz and 5 GHz. Try to avoid placing nodes on opposite sides of such walls. ([ursamajorlab.com](https://www.ursamajorlab.com/blog/wifi-signal-attenuation-wall-materials-2-4ghz-5ghz-6ghz/?utm_source=openai))  \n- Glass walls affect 6 GHz as well\u2014though usually less than concrete. Metal-coated glass particularly bad. ([ursamajorlab.com](https://www.ursamajorlab.com/blog/wifi-signal-attenuation-wall-materials-2-4ghz-5ghz-6ghz/?utm_source=openai))  \n- Floors and ceilings: if multiple floors, avoid catching signal through floor/ceiling; vertical alignment helps. If too many floors, consider putting a node on each floor.  \n\n---\n\n## E. Testing & Iteration\n\n1. Use the Deco app\u2019s guided layout tools\u2014draw out your home plan, mark rooms and where nodes are placed. It helps visualize dead zones. ([tp-link.com](https://www.tp-link.com/us/support/faq/1446/?utm_source=openai))  \n2. After placing a node, check the **\u201csignal strength from source Deco\u201d** in the app; adjust until it shows 2 bars or more. If it's lower, move the node closer or to a location with fewer obstructions. ([tp-link.com](https://www.tp-link.com/us/support/faq/1446/?utm_source=openai))  \n3. Walk around your main use areas with a phone or laptop; test speeds on each band (2.4, 5, 6 GHz) at different points.  \n4. Take into account which devices support 6 GHz\u2014if mostly older devices, 5 GHz or 2.4 GHz may do more work, so placement to favor those bands may matter more.\n\n---\n\nIf you like, I can walk through your exact house layout with your input (rooms, walls, floors, where you want coverage), and suggest specific node locations (e.g. \u201cnode 1 in living room shelf, node 2 in upstairs hallway,\u201d etc.). Do you want to do that? If so, send me your layout details."
    },
    {
        "role": "user",
        "content": "I%20have%202%20floors%2C%203%20bedroomsupstars%2C%20the%20main%20deco%20will%20be%20at%20the%20front%20of%20the%20house%20in%20the%20lounge%20next%20to%20the%20router%20and%20tv.%20I%20want%20good%20signal%20up%20stairs%20in%20the%20back%20bedroom%2C%20where%20my%20computer%20is%20where%20should%20I%20place%20the%20second%20and%203rd%20units"
    },
    {
        "role": "assistant",
        "content": "Here\u2019s a recommended layout plan based on your house\u20142 floors, 3 upstairs bedrooms\u2014plus tips and visual guidance to help you place the second and third Deco BE65 Pro units so your upstairs back bedroom (where your computer is) gets strong signal.  \n\n---\n\n## 1. Backdrop: What the Tech Tells Us\n\n- The BE65 Pro supports tri-band Wi-Fi 7 (2.4 GHz, 5 GHz, 6 GHz) which can give you ultra-high speeds\u2014especially on 6 GHz\u2014but **high frequencies like 6 GHz lose strength quickly through walls, floors, or any dense materials**. ([fixoryhq.com](https://fixoryhq.com/en/wifi7-6ghz-wall-fix/?utm_source=openai))  \n- Wireless backhaul (node-to-node link) works best when the satellite node gets a good signal from the source node: within **~6\u201310 meters (20\u201330 feet)** under typical conditions (**one wall or fewer**); if there are more obstacles, this distance needs to shrink. ([dominetec.com.br](https://dominetec.com.br/en/ideal-distance-between-mesh-wifi-nodes?utm_source=openai))\n\n---\n\n## 2. Your Layout Assumptions\n\n- First floor: lounge area at the front with main Deco + router + TV.  \n- Second floor: three bedrooms, back bedroom has your computer.  \n- You want strong signal upstairs, especially in the back bedroom.  \n\n---\n\n## 3. Recommended Node Placement\n\nHere\u2019s where to put Deco #2 and Deco #3 to get good coverage upstairs, particularly in your back bedroom computer area.\n\n| Node | Floor | Approx Position | Purpose |\n|------|-------|-------------------|---------|\n| Deco #1 (Main) | First floor, front lounge | Already placed with router and TV | Main hub |\n| Deco #2 | First floor, **midway toward staircase/center** | Put it roughly halfway back across the first floor but still before the stairs\u2014maybe in a hallway or open area near the stairwell. | Helps carry signal upstairs more directly; improves backhaul for upstairs nodes. |\n| Deco #3 | Second floor | Position in a central upstairs hallway\u2014ideally about as centrally as possible across the three bedrooms, and close enough to the back bedroom so the backhaul link is strong. Maybe hang it on the wall just outside of that back room. | Brings strong coverage to the back bedroom and balances speed for all upstairs rooms. |\n\n---\n\n## 4. Why This Layout Works\n\n1. **Good vertical spacing:** By placing Deco #2 near the staircase/ceilings, you reduce how much signal has to travel through thick ceilings or away from the stair access.  \n2. **Midpoint for backhaul:** Deco #2 acts to \u201ccatch\u201d a strong signal from the main unit, then relays it upstairs to Deco #3. If Deco #3 were trying to pull signal all the way from the main node through the ceiling and multiple walls, you\u2019ll see weak performance.  \n3. **Closer to computer:** Deco #3 near the back bedroom ensures minimal obstruction to your PC upstairs and maximizes opportunity to use high-speed bands like 6 GHz when you\u2019re in that room.  \n4. **Balanced coverage:** Other bedrooms will also benefit from the upstairs hallway location; even if signal isn\u2019t perfect in all spots, 5 GHz will generally hold up well in adjacent rooms once you have a strong upstairs node.  \n\n---\n\n## 5. Signal & Distance Guidelines\n\n- Place Deco #2 where the main node (Deco #1) shows at least **-60 to -67 dBm** in the backhaul link\u2014this is an \u201cideal\u201d range. Weaker than that, and performance drops off. ([dominetec.com.br](https://dominetec.com.br/en/ideal-distance-between-mesh-wifi-nodes?utm_source=openai))  \n- Keep distance between nodes on same floor to ~20\u201330 feet if possible (less if there are walls or obstacles). ([dominetec.com.br](https://dominetec.com.br/en/ideal-distance-between-mesh-wifi-nodes?utm_source=openai))  \n- For upstairs node (Deco #3), try to avoid having the signal traverse another full floor\u2020 and more than one thick wall\u2014ideally it should be mostly through drywall or interior walls only.  \n\n\u2020Ceilings/floors often have wood joists or sometimes dense materials that significantly weaken 6 GHz and even 5 GHz. ([fixoryhq.com](https://fixoryhq.com/en/wifi7-6ghz-wall-fix/?utm_source=openai))\n\n---\n\n## 6. Practical Touches & Testing\n\n- Elevate all nodes: put them on shelves or wall-mounts, **off the floor**\u2014this reduces signal loss through materials below.  \n- Keep deco #2 and #3 away from large metal objects, mirrors, HVAC vents, large furniture\u2014anything that blocks or reflects signal.  \n- After installing, go into the Deco app and check the \u201csignal strength / link rate\u201d for each backhaul. If you see weak indicators (one bar, or status shows \u201cweak signal\u201d), try moving that node slightly closer or to a different wall.  \n- Walk to your computer upstairs, test speed on 6 GHz, 5 GHz, and 2.4 GHz bands. If 6 GHz is dropping or rambling downstairs, the node may be too far or too many barriers.\n\n---\n\nIf you want, I can draw up a rough sketch of your house (with your wall types if you know them) and mark suggested node spots. Do you know the wall/ceiling materials (drywall, brick, concrete) in your stairs/ceiling? That will help refine placement."
    },
    {
        "role": "user",
        "content": "I%20have%20tried%20this%20layout%2C%20But%20my%20all%20my%20devices%20automatically%20connect%20to%20node%201%20in%20the%20lounge."
    },
    {
        "role": "assistant",
        "content": "If all of your devices are stubbornly connecting to Deco #1 (main unit), even when Deco #2 or #3 are closer, there are a few settings and tricks you can use to guide them toward switching. TP-Link has introduced features to give you more control, and there are practical steps that often help with sticky connections. Here's what you can try.\n\n---\n\n## What\u2019s Going On: Why Devices Stick to Deco #1\n\n- Deco systems aim to connect devices to the node with the strongest signal, but **many devices (phones, laptops, TVs)** make their own decisions about staying connected. Even if signal strength drops, they may not switch if certain thresholds aren\u2019t met. ([tp-link.com](https://www.tp-link.com/us/support/faq/3038/?utm_source=openai))  \n- Your device might see the signal from Deco #1 as \u201cgood enough,\u201d so it stays there, even though Deco #3 upstairs is closer. This is especially true with 5 GHz or 2.4 GHz bands. ([tp-link.com](https://www.tp-link.com/us/support/faq/3038/?utm_source=openai))  \n\n---\n\n## Newer TP-Link Features That Let You Guide Connections\n\n1. **Connection Preference (Client Device)**  \n   Some Deco firmware versions (including for BE65 Pro units) now include a \u201cConnection Preference\u201d feature. This allows you to tell a specific client device which Deco node (and which band) you prefer it to use. ([tp-link.com](https://www.tp-link.com/sg/support/faq/3480/?utm_source=openai))  \n\n   - In the Deco app:  \n     \u2022 Go to *Online Clients*  \n     \u2022 Find the device (e.g. your computer)  \n     \u2022 Tap *Connection Preference*  \n     \u2022 Choose which Deco node plus band (2.4GHz / 5GHz / 6GHz)  \n     \u2022 Save these settings.\n\n2. **Specified Connection**  \n   This is similar but lets you override the automatic behavior, binding a device to your chosen node and band. Useful for fixed-location gear (TV, desktop). ([community.tp-link.com](https://community.tp-link.com/us/home/kb/detail/412658?utm_source=openai))  \n\n3. **Toggle Mesh Technology (if available for your model)**  \n   Disabling mesh roaming for a device may prevent it from hopping between nodes. Some users report that turning it off for a specific device helps \u201clock\u201d it to whichever node it was connected to at the moment. ([community.tp-link.com](https://community.tp-link.com/en/home/forum/topic/171190?utm_source=openai))  \n\n---\n\n## Things to Check/Update\n\n- **Firmware**: Ensure all Deco units are running the latest firmware. TP-Link has been adding the \u201cSpecified Connection\u201d/ \u201cConnection Preference\u201d features in recent firmware versions. ([community.tp-link.com](https://community.tp-link.com/us/home/kb/detail/412658?utm_source=openai))  \n- **Model support**: Not all models fully support Connection Preference yet. Double-check that your BE65 Pro units are on a firmware build that includes this feature. ([community.tp-link.com](https://community.tp-link.com/us/home/kb/detail/412658?utm_source=openai))  \n\n---\n\n## Practical Workarounds When the Above Options Are Unavailable/Not Working\n\nIf your model or firmware doesn't support the features, try these:\n\n- **Disable Wi-Fi on devices temporarily**: Turning Wi-Fi off, then on again sometimes forces a reconnection\u2014and often the device picks the nearer node. (It \u201csees\u201d fewer options and picks the strongest available).  \n- **Move the device physically closer to the preferred node** and restart Wi-Fi\u2014it helps ensure that Deco #2 or Deco #3 has a stronger signal at reconnection time.  \n- **Use different SSIDs**: This is a more radical approach\u2014split the network into multiple SSIDs (if Deco app allows), e.g. \u201cHome-2.4GHz\u201d \u201cHome-5GHz,\u201d etc. Then manually connect your device to the SSID that your desired node broadcasts more strongly. This reduces the mesh\u2019s automation, though.  \n\n---\n\nIf you like, I can walk you through the exact steps in your Deco app\u2014what screens to open\u2014to apply **Connection Preference** or **Specified Connection** for your computer upstairs. Do you want me to guide you through that on BE65 Pro?"
    },
    {
        "role": "user",
        "content": "what%20features%20are%20affected%20whe%20using%20the%20decoBE65%20Pro%20in%20access%20mode"
    },
    {
        "role": "assistant",
        "content": "Here are what I found on what features are *disabled or limited* when you use a TP-Link Deco BE65 Pro in **Access Point (AP) Mode**. Some features are fully removed, others are partially functional or limited. The specifics can depend a bit on firmware version or region, but these are the ones confirmed by TP-Link and from user reports.\n\n---\n\n## What Access Point Mode Means (for Deco BE65 Pro)\n\n- When in AP mode, your Deco nodes extend an existing network instead of acting as the main router. Your existing router/gateway device handles things like:\n  - DHCP (assigning IP addresses)  \n  - NAT (network\u2010address translation)  \n  - Routing & firewall functions  \n\u2003([tp-link.com](https://www.tp-link.com/bg/support/faq/1432/?utm_source=openai))  \n- AP mode lets you keep your current router and have Deco just provide wireless coverage and optionally a wired backhaul.  \n  ([tp-link.com](https://www.tp-link.com/ae/support/faq/1842/?utm_source=openai))\n\n---\n\n## Features Removed or Limited in Access Point Mode\n\nHere are the main Deco features you lose when switching from Router Mode to AP Mode:\n\n| Feature | Status in AP Mode | Notes / Source |\n|---------|-------------------|-----------------|\n| Antivirus / Security Scanning | Disabled | TP-Link states this is not available in AP mode. ([tp-link.com](https://www.tp-link.com/ae/support/faq/1842/?utm_source=openai)) |\n| Parental Controls | Disabled | No longer available when Deco is AP; routing/gateway features are managed by your existing router. ([tp-link.com](https://www.tp-link.com/ae/support/faq/1842/?utm_source=openai)) |\n| QoS (Quality of Service) | Disabled | Traffic shaping, prioritization, etc. not functional via Deco\u2019s app in AP mode. ([service-provider.tp-link.com](https://service-provider.tp-link.com/uk/faq/471/?utm_source=openai)) |\n| DHCP Server / NAT / Firewall / Routing | Disabled | The existing router handles all these. Deco does not perform NAT or manage the subnet. ([tp-link.com](https://www.tp-link.com/bg/support/faq/1432/?utm_source=openai)) |\n| Port Forwarding | Disabled | Cannot configure from Deco when in AP mode. ([tp-link.com](https://www.tp-link.com/ae/support/faq/1842/?utm_source=openai)) |\n| Address Reservation (Static IPs via MAC) | Disabled | Deco won\u2019t be able to reserve IPs in AP mode; your gateway must handle that. ([tp-link.com](https://www.tp-link.com/ae/support/faq/1842/?utm_source=openai)) |\n| DDNS (Dynamic DNS) | Disabled | Deco\u2019s DDNS capability is not available in AP mode. ([tp-link.com](https://www.tp-link.com/ae/support/faq/1842/?utm_source=openai)) |\n| VPN Server / Client | Disabled (usually) | Since Deco is not acting as a router, VPN endpoint features are generally unavailable. ([service-provider.tp-link.com](https://service-provider.tp-link.com/uk/faq/471/?utm_source=openai)) |\n| IPv4/IPv6 Configuration and Static Routing | Limited or Disabled | You\u2019ll lose advanced IP configuration controls in Deco app. Routing roles delegated to the primary router. ([service-provider.tp-link.com](https://service-provider.tp-link.com/uk/faq/471/?utm_source=openai)) |\n| IoT Network / Guest Network features | Mixed/Partial | Basic guest network still works (per model) but certain isolated features may not perform as in Router mode. ([service-provider.tp-link.com](https://service-provider.tp-link.com/uk/faq/471/?utm_source=openai)) |\n\n---\n\n## What Still Works / What You\u2019ll Keep\n\nGood news\u2014AP mode still provides many core features, so your Deco system remains very useful. These are still supported:\n\n- Wi-Fi coverage: 2.4 GHz, 5 GHz, 6 GHz bands will continue to work and broadcast. Guest networks may still be available (but with limited isolation features).  \n  ([tp-link.com](https://www.tp-link.com/ae/support/faq/1842/?utm_source=openai))  \n- Wireless / Ethernet backhaul between Deco units: Deco nodes can still connect to each other (wired or wirelessly) to form a mesh.  \n  ([tp-link.com](https://www.tp-link.com/ae/support/faq/1842/?utm_source=openai))  \n- Basic Wi-Fi settings (SSID, password) and some device\u2010based band or node preference settings (depending on firmware) may work.  \n  ([tomshardware.com](https://www.tomshardware.com/networking/routers/tp-link-deco-be65-pro-wi-fi-7-mesh-router-review?utm_source=openai))  \n- LED control, firmware updates, rebooting.  \n  ([service-provider.tp-link.com](https://service-provider.tp-link.com/uk/faq/471/?utm_source=openai))  \n\n---\n\nIf you want, I can check the most recent firmware build for *your region* to see exactly what\u2019s removed in your version compared to what TP-Link lists in general. That way you\u2019ll know exactly which limitations will affect *your setup*. Do you want me to pull that info for your area?"
    },
    {
        "role": "user",
        "content": "no%20thank%20you"
    },
    {
        "role": "assistant",
        "content": "Understood! If you ever change your mind or run into a specific issue, feel free to ask\u2014I can dig up the precise details for you."
    }
]