[
    {
        "role": "user",
        "content": "how%20to%20project%20wirelessly%20to%20a%20monitor%20in%20windows%2011"
    },
    {
        "role": "assistant",
        "content": "Here\u2019s a detailed, up-to-date guide for wirelessly projecting (casting/mirroring/extending) a Windows 11 screen to a monitor, TV, projector, or even another PC.\n\n---\n\n## 1. What You\u2019ll Need\n\n- **Miracast support**: Both your source device (your Windows 11 PC) and the target display must support Miracast. If the external display doesn\u2019t have Miracast built in, you\u2019ll need a Miracast-compatible adapter (dongle) plugged in via HDMI + powered via USB. ([support.microsoft.com](https://support.microsoft.com/en-gb/windows/connect-to-a-projector-or-pc-7e170c39-58dc-c866-7d55-be2372632892?utm_source=openai))  \n- **Wireless capability**: Your PC must have a Wi-Fi adapter and support Wi-Fi Direct. Miracast typically uses Wi-Fi Direct for peer-to-peer connections. ([w11.es](https://w11.es/en/Tutorials/Miracast-on-Windows-11%3A-A-complete-guide-to-projecting-your-screen/?utm_source=openai))  \n- **Windows version**: Windows 11 version 22H2 or newer is required to use the \u201cWireless Display\u201d optional feature, which lets a PC act as the display (receiver) in addition to projecting to other devices. ([support.microsoft.com](https://support.microsoft.com/en-gb/windows/connect-to-a-projector-or-pc-7e170c39-58dc-c866-7d55-be2372632892?utm_source=openai))  \n\n---\n\n## 2. Set Up the Target Device\n\n- If it's a **smart TV/projector** with native Miracast: switch it to screen mirroring / wireless display mode / Miracast input. Wait for the TV/display to become discoverable. ([microsoft.com](https://www.microsoft.com/en-us/windows/learning-center/how-to-set-up-a-wireless-display?msockid=2adb56da48a565a8326c401d49d164f9&utm_source=openai))  \n- If you're using a **Miracast adapter** (dongle): plug the HDMI into the display and USB power into the display (or wall). Change the display\u2019s input/source to the adapter\u2019s HDMI port. The dongle should show itself as a wireless display once active. ([microsoft.com](https://www.microsoft.com/en-us/windows/learning-center/how-to-set-up-a-wireless-display?msockid=2adb56da48a565a8326c401d49d164f9&utm_source=openai))  \n\n---\n\n## 3. Prepare Your Windows 11 PC\n\n- **Check Miracast support**: Press `Win + K`. If you see available wireless displays in the panel, your PC likely supports Miracast. If not, either the hardware is not compatible, or you need to update drivers/firmware. ([support.microsoft.com](https://support.microsoft.com/en-us/windows/fix-connections-to-miracast-wireless-displays-c8a396a7-634a-3521-ed8f-e8d08b7816f1?utm_source=openai))  \n- **Install \u201cWireless Display\u201d optional feature** (if you want your PC to act as a receiver, or if the option is missing):\n  1. Open Settings \u2192 Apps \u2192 Optional features.  \n  2. Click \u201cAdd an optional feature\u201d \u2192 \u201cView features\u201d.  \n  3. Search for \u201cWireless Display\u201d, check it, then install.  \n  4. Restart your PC. ([support.microsoft.com](https://support.microsoft.com/en-gb/windows/connect-to-a-projector-or-pc-7e170c39-58dc-c866-7d55-be2372632892?utm_source=openai))  \n\n---\n\n## 4. Project from Your Windows 11 PC (Casting to the Display)\n\n1. Turn on the external display (TV, projector, or monitor + adapter) and confirm it's in discovery mode.  \n2. On your PC, press `Windows + K`: that opens the projection panel. Select the display you want to project to from the list. ([support.microsoft.com](https://support.microsoft.com/en-gb/windows/connect-to-a-projector-or-pc-7e170c39-58dc-c866-7d55-be2372632892?utm_source=openai))  \n3. Follow any prompts on the external display (accept connection, maybe enter a PIN). ([xataka.com](https://www.xataka.com/basics/miracast-windows-11-como-proyectar-tu-pc-a-pantalla-externa-forma-inalambrica?utm_source=openai))  \n4. Once connected, you can choose how the display is used:  \n   - **Duplicate**: same screen shown on both  \n   - **Extend**: treat external display as additional screen  \n   - **Second screen only**: external becomes only display  \n   - **PC screen only**: turn off external display usage ([support.microsoft.com](https://support.microsoft.com/en-gb/windows/connect-to-a-projector-or-pc-7e170c39-58dc-c866-7d55-be2372632892?utm_source=openai))  \n\n---\n\n## 5. Make a Windows PC a Receiver (Project to this PC)\n\nIf you want to use a second Windows 11 machine as the target (receiver):\n\n1. Make sure \u201cWireless Display\u201d is installed. ([support.microsoft.com](https://support.microsoft.com/en-gb/windows/connect-to-a-projector-or-pc-7e170c39-58dc-c866-7d55-be2372632892?utm_source=openai))  \n2. On the receiver PC, go to Settings \u2192 System \u2192 *Projecting to this PC*. Configure availability (always, available on secure networks, etc.) ([support.microsoft.com](https://support.microsoft.com/en-gb/windows/connect-to-a-projector-or-pc-7e170c39-58dc-c866-7d55-be2372632892?utm_source=openai))  \n3. On the source PC, use `Win + K` \u2192 select the receiver PC. Accept prompt on receiver if needed. ([support.microsoft.com](https://support.microsoft.com/en-gb/windows/connect-to-a-projector-or-pc-7e170c39-58dc-c866-7d55-be2372632892?utm_source=openai))  \n\n---\n\n## 6. Troubleshooting Tips\n\n- **Drivers & firmware**: Update your Wi-Fi adapter and graphics card drivers. Missing or outdated drivers often cause the projection option to be missing or fail. ([support.microsoft.com](https://support.microsoft.com/en-us/windows/fix-connections-to-miracast-wireless-displays-c8a396a7-634a-3521-ed8f-e8d08b7816f1?utm_source=openai))  \n- **Network issues**: Both devices should be on the same Wi-Fi network when required, or Wi-Fi Direct should be enabled and functional. Firewalls or router settings (e.g. AP isolation) can block discovery. ([w11.es](https://w11.es/en/Tutorials/Miracast-on-Windows-11%3A-A-complete-guide-to-projecting-your-screen/?utm_source=openai))  \n- **Adapter issues**: If the display doesn\u2019t support Miracast natively, make sure the adapter is powered properly. USB power through the display\u2019s USB port or external is best. ([microsoft.com](https://www.microsoft.com/en-us/windows/learning-center/how-to-set-up-a-wireless-display?msockid=2adb56da48a565a8326c401d49d164f9&utm_source=openai))  \n- **Optional feature issues**: If \u201cConnect to wireless display\u201d isn\u2019t visible under Display settings, it may mean \u201cWireless Display\u201d isn\u2019t installed. Or that your build of Windows 11 is outdated. ([support.microsoft.com](https://support.microsoft.com/en-gb/windows/connect-to-a-projector-or-pc-7e170c39-58dc-c866-7d55-be2372632892?utm_source=openai))  \n\n---\n\nIf you want, I can also walk you through how to do this with specific hardware you have (TV model, adapter, etc.). Do you want me to help with that?"
    }
]