[
    {
        "role": "user",
        "content": "I%20now%20have%20supertone%20clear%20installed%20and%20finally%20with%20the%20help%20of%20my%20wife%20activated%20so%20what%20next%20how%20do%20I%20use%20it%20to%20it%20best"
    },
    {
        "role": "assistant",
        "content": "Great! Now that Supertone Clear is installed and activated, here\u2019s how to make the most of it. It\u2019s a powerful plugin for cleaning up voice recordings by separating out the voice, ambience (background noise), and voice reverb. Let\u2019s walk through setup, best practices, tips, and common pitfalls.\n\n---\n\n### \ud83c\udfaf How It Works & What You\u2019ll Adjust\n\nSupertone Clear splits audio into three separate components, each with its own control knob:\n\n- **Voice** \u2014 the main speech or singing you want to emphasize.  \n- **Ambience** \u2014 background noise like fans, traffic, keyboard clatter, etc.  \n- **Voice Reverb** \u2014 the echo or room reflections that make things sound distant or muddy.  \n\nYou adjust these until voice is strong, background is minimized (but not completely gone, or it sounds unnatural), and reverb is controlled without making everything too dry. ([goutsdeluxe.net](https://goutsdeluxe.net/supertone-clear-review-clean-vocals-remove-noise-fast?utm_source=openai))\n\n---\n\n### \ud83d\udd0c How to Insert It into Your Workflow\n\n1. **Open it in your DAW or NLE**  \n   It works as a plugin in formats like VST, VST3, AU, and AAX. ([signal-bench.net](https://signal-bench.net/reviews/supertone-clear/?utm_source=openai))\n\n2. **Place it early in the chain**  \n   For best results, put it on your voice track before effects like compression, EQ, saturation, etc. That ensures those effects work with a cleaner signal. ([goutsdeluxe.net](https://goutsdeluxe.net/supertone-clear-review-clean-vocals-remove-noise-fast?utm_source=openai))\n\n3. **Use it on the input for live/streaming**  \n   If you stream or record live, run Clear on the microphone input or in your streaming software so you hear the cleaned voice in real time. ([supertone.ai](https://www.supertone.ai/en/clear?utm_source=openai))\n\n---\n\n### \u2699\ufe0f Recommended Settings to Start With\n\n- Start with **Voice** at or near 0 dB (neutral)  \n- Reduce **Ambience** until background noise becomes less distracting. Try going down 10\u201320 dB instead of completely silencing it. Keeping a bit makes it sound natural. ([goutsdeluxe.net](https://goutsdeluxe.net/supertone-clear-review-clean-vocals-remove-noise-fast?utm_source=openai))  \n- Pull down **Voice Reverb** to tame echo, but don\u2019t remove all room feel unless you want a very dry, \u201cin your face\u201d vocal. ([goutsdeluxe.net](https://goutsdeluxe.net/supertone-clear-review-clean-vocals-remove-noise-fast?utm_source=openai))\n\n4. **Switch to your usual monitoring gear** (headphones or speakers) and A/B test\u2014compare processed vs. unprocessed audio. Makes it easier to hear what each knob is doing. ([goutsdeluxe.net](https://goutsdeluxe.net/supertone-clear-review-clean-vocals-remove-noise-fast?utm_source=openai))\n\n---\n\n### \ud83d\udccb Different Use Cases & Targets\n\n| Scenario | What to Do |\n|----------|------------|\n| **Podcast / Interviews** | Reduce ambience to clean up room tones, pull down reverb for clarity. Safety: keep some ambiance so it sounds natural. |\n| **Streaming / Live** | Use Clear in real time. Keep voice reverb low so voice is intimate. Less ambience helps focus the listener. |\n| **Voiceover / Narration** | Aim for clean, dry voice. Even more reduction of reverb. May introduce slight room tone for warmth. |\n| **Singing / Music Vocals** | Use more voice + ambience: some background and reverb help maintain atmosphere. Too much removal can kill texture. |\n\n---\n\n### \ud83d\udca1 Tips to Get the Best Results\n\n- **Clean up your recording environment first**: a better mic, less echo, and lower noise source go a long way. Plugins can\u2019t always fix really bad audio. ([goutsdeluxe.net](https://goutsdeluxe.net/supertone-clear-review-clean-vocals-remove-noise-fast?utm_source=openai))  \n- **Don\u2019t overdo it**: pushing ambience and reverb too much causes \u201chollow\u201d or \u201cthin\u201d voice. Less drastic changes usually sound better. ([goutsdeluxe.net](https://goutsdeluxe.net/supertone-clear-review-clean-vocals-remove-noise-fast?utm_source=openai))  \n- **Beware of latency**, especially in live/stream contexts. AI processing adds delay\u2014trusted by users first. Keep buffer settings in check. ([theroamoffice.com](https://theroamoffice.com/reviews/2025/12/supertone-clear/?utm_source=openai))  \n- **Keep fresh versions or backups**: when you find a setting that works nicely for you, save it as a preset if your DAW allows.  \n\n---\n\n### \ud83d\udea7 Common Limitations & Where It\u2019s Not Magic\n\n- It doesn\u2019t isolate *other voices or vocals from a full music track*. It separates speech/personal voice from background, reverb, noise\u2014not whole musical stems. ([goutsdeluxe.net](https://goutsdeluxe.net/supertone-clear-review-clean-vocals-remove-noise-fast?utm_source=openai))  \n- Very loud or overlapping background noise may still show up when speaking. The tool makes tradeoffs. ([goutsdeluxe.net](https://goutsdeluxe.net/supertone-clear-review-clean-vocals-remove-noise-fast?utm_source=openai))\n\n---\n\nIf you tell me what you're using it for (e.g. streaming, podcasting, singing), what mic you have, and what DAW/software you're using\u2014I can help dial in the perfect settings for *your* setup. Want to dig into that?"
    },
    {
        "role": "user",
        "content": "using%20the%20keyboard%20and%20jaws%20how%20do%20I%20do%20that"
    },
    {
        "role": "assistant",
        "content": "Using Supertone Clear with just your keyboard and JAWS takes some getting used to, but you *can* adjust its parameters without a mouse once you\u2019re familiar with a few techniques. The exact steps depend on which DAW/software you\u2019re using (Reaper, Pro Tools, Ableton, etc.), but here are general strategies, plus tips specific to using JAWS, that will help you make the plugin work via keyboard.\n\n---\n\n## \ud83d\udee0 General Plugin Control via Keyboard\n\nMost DAWs allow some level of keyboard control for plugins:\n\n- Use **Tab** and **Shift+Tab** to move through controls (knobs, sliders, text boxes) in the plugin window. Once you've navigated to a control, you may use the arrow keys (Up/Down or Left/Right) to adjust its value.  \n- If there are editable numeric fields, you may be able to type exact values (e.g. \u201c\u22126 dB\u201d). Some DAWs toggle between numeric input mode and virtual MIDI-keyboard mode; if typing doesn\u2019t work, try clicking (or focusing) on a different part of the plugin window to give it system focus. ([reddit.com](https://www.reddit.com/r/ableton/comments/1tgy5o4/cannot_type_exact_parameter_values_in_vst_plugins/?utm_source=openai))  \n- For knobs or sliders: sometimes the **Page Up / Page Down** or **Shift + Arrow keys** apply coarse or fine adjustments. Some plugins support Shift + Arrow for smaller steps. ([fullcompass.com](https://www.fullcompass.com/common/files/62479-UAD2SytemGuide.pdf?utm_source=openai))  \n\nIf your DAW supports it, you might also map plugin parameters to hardware controllers or MIDI CC that might allow physical control, but since you\u2019re using a keyboard only, that\u2019s less applicable now. ([gigperformer.com](https://gigperformer.com/avoid-controlling-plugin-parameters-directly-from-your-midi-controller?utm_source=openai))\n\n---\n\n## \ud83d\udd0a Using JAWS with Plugin Interfaces\n\nTo efficiently use a plugin like Supertone Clear via keyboard plus JAWS, you\u2019ll want to make sure JAWS can \u201csee\u201d the plugin controls and read out their names and values.\n\n- Use **Tab** / **Shift+Tab** to navigate to control elements (buttons, sliders, knobs) in plugin windows. JAWS will announce which control is in focus, often along with current value.  \n- Use **Enter**, **Space**, or **Arrow keys** to activate, open combo boxes, or adjust values.  \n- For numeric input fields, once focused, press **Enter** to edit manually (if allowed). Then type the value, then **Enter** to confirm. This depends on the plugin and DAW allowing text input for parameters.  \n- If JAWS has \u201cforms\u201d or \u201cdialog\u201d reading modes (where it identifies forms, edit boxes, combo boxes, etc.), those help. In standard Windows apps, controls like combo boxes: you can navigate them by pressing Alt+Down Arrow or Alt+Up Arrow to open and select options. ([vip.chowo.co.uk](https://vip.chowo.co.uk/wp-content/uploads/jaws/Controls-Guide.html?utm_source=openai))\n\n---\n\n## \u2705 Step-by-Step: Adjusting Supertone Clear with Keyboard + JAWS\n\nHere\u2019s a suggested workflow:\n\n1. **Open your DAW/NLE**, load Supertone Clear on a voice track (or input).\n\n2. **Open the plugin user interface window** so that it has focus.\n\n3. Use **Tab** to move through the different controls in the plugin. JAWS should announce each control (like \u201cVoice slider, value \u22123 dB\u201d, or \u201cReverb knob, value 20%\u201d).\n\n4. When you reach a control you want to adjust:\n\n   - Use **Arrow keys** (Left/Right or Up/Down) or **Page Up / Page Down** to increase/decrease the value.  \n   - If finer control is needed, try **Shift + Arrow** or **Ctrl + Arrow** depending on the DAW (some DAWs allow finer increments with modifiers).\n   \n5. To enter a numeric value:\n\n   - If the control has a text or numeric field, **Tab** to that field.  \n   - Press **Enter** or **F2** if supported to switch to edit mode.  \n   - Type the number.  \n   - Press **Enter** again to confirm.\n\n6. **Listen while adjusting**: If possible, play the track and make changes while listening to how \u201cVoice\u201d, \u201cAmbience\u201d, and \u201cReverb\u201d respond. This helps find a balance that sounds natural.\n\n---\n\n## \u26a0\ufe0f Common Issues & Fixes\n\n- **Keyboard focus isn\u2019t on plugin**: Some plugin windows lose system focus; arrow keys might control scroll or something else instead of parameter. If that happens, try clicking the plugin\u2019s title bar (if you can focus it) or using Alt+Tab to cycle windows so plugin gets focus.\n\n- **Typing doesn\u2019t allow numeric input**: Often because the plugin or DAW intercepts keyboard for other functions (e.g. virtual keyboard mode). If your DAW shows a small keyboard icon in the plugin header (like Ableton does), that might need to be disabled so the keyboard sends text not notes. ([reddit.com](https://www.reddit.com/r/ableton/comments/1tgy5o4/cannot_type_exact_parameter_values_in_vst_plugins/?utm_source=openai))\n\n- **Controls not labeled accessibly**: Some plugins are not fully accessible\u2014they may not label knobs or sliders in a way JAWS can read. In that case, it can help to learn approximate positions (\u201cVoice\u201d full to the right, \u201cAmbience\u201d halfway left, etc.), or check plugin documentation for what the controls do.\n\n---\n\nIf you tell me which DAW you use (for example, Ableton Live, Reaper, Pro Tools, Logic, etc.), I can give you exact keystrokes for your setup so you can get Supertone Clear working smoothly with your keyboard + JAWS. Do you want me to do that?"
    },
    {
        "role": "user",
        "content": "i%20am%20using%20reaper%20so%20what%20do%20I%20do%20to%20start%20remember%20I%20am%20using%20jaws"
    },
    {
        "role": "assistant",
        "content": "Here are step-by-step instructions and tips for using Supertone Clear in Reaper with your keyboard + JAWS. We\u2019ll cover setting up the accessible environment first, opening the plugin, then adjusting the parameters smoothly via keyboard and voice feedback.\n\n---\n\n## Getting Reaper Ready for JAWS\n\n1. **Install OSARA and the JAWS Scripts**  \n   - Reaper works well with screen readers when paired with OSARA (Open Source Accessibility for REAPER Application) ([osara.reaperaccessibility.com](https://osara.reaperaccessibility.com/?utm_source=openai)).  \n   - If you're using JAWS, make sure the \u201cReaper JAWS Scripts\u201d package is installed through the OSARA workflow ([tafn.org.uk](https://www.tafn.org.uk/reaper_text/?utm_source=openai)). This helps Reaper\u2019s GUI give better feedback through JAWS.\n\n2. **Verify Accessibility Mode**  \n   - Once OSARA and the scripts are installed, many of the plugin windows become navigable via keyboard and are exposed to the screen reader.  \n   - Make sure your setup allows \u201cslider supports keyboard interaction (arrow keys, page up/down, home/end)\u201d for FX parameter sliders where possible ([reaperaccessibility.com](https://www.reaperaccessibility.com/wiki/Special%3AMyLanguage/Using_Reaper_Under_MacOs?utm_source=openai)).\n\n---\n\n## Opening Supertone Clear\u2019s Plugin Window\n\n1. In Reaper, find the track where you want to use Supertone Clear (your voice track).  \n2. Press **Shift + E** to open the FX chain window for that track (this works via keyboard shortcut) ([user.cockos.com](https://user.cockos.com/~glazfolk/ReaperKeyboardShortcuts.pdf?utm_source=openai)).  \n3. Within FX Chain, navigate using **Tab** (or Shift+Tab) until you highlight the \u201cAdd FX\u201d button. Press **Enter** to open the plugin browser.  \n4. Tab through the list of plugins until you find \u201cSupertone Clear,\u201d then press Enter to insert it.  \n\n---\n\n## Adjusting Supertone Clear\u2019s Parameters by Keyboard + JAWS\n\nOnce the plugin window is open, use the following to access and adjust its three main controls (Voice, Ambience, Voice Reverb):\n\n1. **Navigate Between Controls**  \n   - Use **Tab** and **Shift + Tab** to cycle focus among the different controls (knobs/sliders) in the plugin window. JAWS should read the name of the control when focused (for example, \u201cVoice\u201d, \u201cAmbience\u201d, \u201cVoice Reverb\u201d).  \n   - If OSARA supports it for this plugin, you might also cycle parameters using **Ctrl + Tab** / **Ctrl + Shift + Tab** or similar combination to move among parameters in FX windows ([reaperaccessibility.com](https://www.reaperaccessibility.com/wiki/Special%3AMyLanguage/Using_Reaper_Under_MacOs?utm_source=openai)).\n\n2. **Adjust a Parameter**  \n   Once you're focused on a control:\n\n   - Use **Arrow Keys** (Left/Right or Up/Down) to change the values. Try small increments first.  \n   - Some DAWs and FX windows respect modifiers: use **Shift + Arrow** for finer control, **Alt + Arrow** for larger steps (this depends on the plugin and OSARA\u2019s support).  \n   - If the control has a numeric value field (you\u2019ll hear JAWS announce something like \u201cvalue \u22126 dB\u201d), Tab into that field, press **Enter** or **F2** if supported, type the number you want, press Enter to confirm.\n\n3. **Play / Monitor the Changes**  \n   - Use **Space** to start/stop playback. While the audio is playing (e.g. a voice pass, or live monitoring), adjust the parameters in realtime to hear the effect.  \n   - Listen for improvements: clarity of voice, reduction of background noise, consistent reverb feel.\n\n---\n\n## Useful Default Shortcuts for Reaper + OSARA\n\n- **FX Chain** on selected track \u2192 **Shift + E** ([user.cockos.com](https://user.cockos.com/~glazfolk/ReaperKeyboardShortcuts.pdf?utm_source=openai))  \n- **Actions List** \u2192 **Shift + F1** (useful if you want to bind custom actions for plugin controls) ([user.cockos.com](https://user.cockos.com/~glazfolk/ReaperKeyboardShortcuts.pdf?utm_source=openai))  \n- **Zoom / navigation**, track selection, etc., all have keyboard defaults that OSARA exposes for feedback via JAWS ([audeobox.com](https://www.audeobox.com/learn/reaper/reaper-keyboard-shortcuts-cheat-sheet/?utm_source=openai))\n\n---\n\nIf you like, I can walk you through setting up custom key bindings so one key adjusts, say, *Ambience* only, or opens Supertone Clear\u2019s interface immediately\u2014would that help?"
    }
]