[
    {
        "role": "user",
        "content": "using%20the%20vocastor%20two%20where%20does%20the%20aux%20cable%20plug%20in%20at%20the%20back%20can%20you%20tell%20me%20from%20a%20blind%20person%20point%20of%20view"
    },
    {
        "role": "assistant",
        "content": "Here\u2019s a description of where the **aux cable** plugs into the **Vocaster Two**, with details aimed at helping someone who\u2019s blind\u2014or has limited sight\u2014locate things by feel and orientation. \u201cAux cable\u201d usually refers to a 3.5 mm jack input, often called the *phone input* or *TRRS phone connector* on this device.  \n\n---\n\n### Where the Phone/Aux Jack Is on the Vocaster Two\n\n**Rear panel layout** (back of the unit; you have to turn it around or feel behind it):\n\n- There is a 3.5 mm **TRRS socket**, labeled with a **phone icon**. This is where the aux cable (for a phone or similar device) plugs in. ([userguides.focusrite.com](https://userguides.focusrite.com/hc/en-gb/articles/26905068611730-Vocaster-Two-specifications?utm_source=openai))  \n- Alongside it, on the same back edge:  \n  - Two XLR mic inputs  \n  - Two balanced \u00bc-inch TRS \u201cMonitor Outputs\u201d for speakers  \n  - Camera output (3.5 mm TRS jack) ([userguides.focusrite.com](https://userguides.focusrite.com/hc/en-gb/articles/26905068611730-Vocaster-Two-specifications?utm_source=openai))  \n\nSo the phone input / aux input is one of the smaller jacks on the rear\u2014about the size of standard headphone plugs.\n\n---\n\n### What It Looks/Feels Like\u2014Tactile Cues\n\nTo find the jack by touch:\n\n1. **Orientation**: Sit or place the Vocaster Two so its front panel is facing you. The back panel is the side away from you.\n\n2. **Top edge landmarks**: Along the top/back edge you\u2019ll likely first find the two larger XLR microphone inputs (they\u2019re big and circular with three holes or pins), and next to those will be jacks for output to speakers.  \n\n3. **Size difference**: The TRRS phone / aux jack is smaller (3.5 mm) than the XLRs and the balanced \u00bc-inch TRS outputs. So find a small round hole slightly recessed among larger holes/jacks.\n\n4. **Icon clue**: Beside that small jack you should feel or find\u2014in tactile layout\u2014a **phone icon**. It may be embossed or printed nearby; run your finger gently to locate raised labeling. Focusrite gear often has small printed icons. ([userguides.focusrite.com](https://userguides.focusrite.com/hc/en-gb/articles/26905032546578-Using-the-Vocaster-Two?utm_source=openai))  \n\n5. **Cable shape**: The aux cable you\u2019ll use is often thin and flexible, with a plug very similar to standard headphones. TRRS means the tip has **three black rings** (so four sections), but many people won\u2019t need to count; just knowing it\u2019s smaller and fits snugly in audio-jack-size sockets helps.\n\n---\n\n### How to Plug It In\n\n- Carefully push the plug straight into the jack until it clicks or feels secure. Since it\u2019s a TRRS phone jack, you\u2019ll push in until it seats fully. If it\u2019s not seated, you may lose one side of the audio or get a loose connection.\n\n- Once plugged in, audio from your phone or other device should be routed through the Vocaster. There\u2019s also a \u201cmix minus\u201d feature so the person on the phone doesn\u2019t hear their own voice delayed. ([userguides.focusrite.com](https://userguides.focusrite.com/hc/en-gb/articles/26905032546578-Using-the-Vocaster-Two?utm_source=openai))\n\n---\n\nIf you want, I can walk you through where all the ports are by sound or feel, so you can memorize exactly where the right one is without looking. Do you want that kind of tactile map?"
    }
]