[
    {
        "role": "user",
        "content": "how%20do%20I%20turn%20curson%20routing%20on%20on%20a%20brailliant%20bi%20series"
    },
    {
        "role": "assistant",
        "content": "It seems like you\u2019re using a *Brailliant BI* (HumanWare) braille display. By \u201cturning cursor routing on,\u201d you likely mean enabling the sensors/buttons above the braille cells that allow placing the editing or navigation cursor directly under one of those cells.\n\nHere are the steps to enable cursor routing (or cursor routing sensors) on a Brailliant BI series display, plus explanations for how it works:\n\n---\n\n## \ud83d\udd0d What Is Cursor Routing on Brailliant BI\n\n- On Brailliant BI braille displays (for example, the 14-cell or 40-cell models), there are small sensors above each braille cell called **Cursor Routing Sensors**. ([perkins.org](https://www.perkins.org/resource/so-many-braille-displays-which-one-right-my-student-part-two/?utm_source=openai))  \n- When editing text, pressing a routing button or sensor moves the software\u2019s cursor to the cell you selected. When not in editing mode, pressing those routing buttons activates whatever item is selected. ([files.ltalk.net](https://files.ltalk.net/download/Docs_Help/BrailliantBI40_Manual.pdf?utm_source=openai))\n\n---\n\n## \u2699\ufe0f How to Turn Cursor Routing On (Enable/Adjust)\n\nYou can configure how cursor routing works through the **Settings** menu on the Brailliant BI. These are the steps, although depending on your exact model (BI-14, BI-40X, etc.), some menu names may vary slightly:\n\n1. Power on your Brailliant BI display.\n\n2. Open the **Main Menu**.  \n   - Typically, this is done by pressing the power button momentarily (within about 1 second) or using the **Joystick**. ([perkins.org](https://www.perkins.org/resource/so-many-braille-displays-which-one-right-my-student-part-two/?utm_source=openai))\n\n3. Navigate to **Settings**.\n\n4. Look for items called **Cursor Sensor**, **Cursor Routing**, or something similar.  \n   - On the BI-14 model, for example, there is a \u201cCursor Sensor\u201d setting: you can set it off or choose a level between 1 (less sensitive) to 5 (more sensitive). Higher numbers mean lighter touch needed to activate routing sensors. ([perkins.org](https://www.perkins.org/resource/so-many-braille-displays-which-one-right-my-student-part-two/?utm_source=openai))  \n   - There is also a setting \u201cCursor Vibration\u201d to control the vibration feedback when a routing sensor is triggered. ([perkins.org](https://www.perkins.org/resource/so-many-braille-displays-which-one-right-my-student-part-two/?utm_source=openai))\n\n5. Adjust to turn it on and make it work comfortably:\n   - **Cursor Sensor** \u2192 choose a sensitivity level from 1-5 or set to \u201cOn\u201d.\n   - **Cursor Vibration** \u2192 also set to some level or \u201cOff\u201d depending on whether you want feedback.  \n   - Try editing text to test how the sensors behave. If it's not consistent, adjust sensitivity.\n\n---\n\n## \ud83d\udca1 Tips and Troubleshooting\n\n- **Experiment with sensitivity**: If sensors are too \u201cjumpy\u201d or require too much pressure, try setting it higher (easier activation) or lower depending on comfort. ([perkins.org](https://www.perkins.org/resource/so-many-braille-displays-which-one-right-my-student-part-two/?utm_source=openai))  \n- **Turn off if not needed**: If cursor sensors are interfering (accidental triggers), you can turn the \u201cCursor Sensor\u201d setting to \u201cOff.\u201d ([perkins.org](https://www.perkins.org/resource/so-many-braille-displays-which-one-right-my-student-part-two/?utm_source=openai))  \n- **Check firmware/manual**: Different models (BI-14, BI-40X) may have slightly different menu paths or names. Consult your user manual (e.g. the manual for BI-40X details cursor routing buttons and their behavior) for model-specific instructions. ([files.ltalk.net](https://files.ltalk.net/download/Docs_Help/BrailliantBI40_Manual.pdf?utm_source=openai))\n\n---\n\nIf you tell me which specific Brailliant BI model you have (BI-14, BI-40X, etc.), I can give step-by-step instructions customized for that model. Do you want that?"
    }
]