[
    {
        "role": "user",
        "content": "where%20do%20I%20find%20the%20zoom%20recorder%20app%20to%20change%20raw%20mode%20ms%20into%20a%20different%20width"
    },
    {
        "role": "assistant",
        "content": "It sounds like you're talking about Zoom\u2019s **MS-RAW** (mid-side raw) mode on a Zoom recorder (like the H-series or F-series units) and wanting to change the \u201cstereo width\u201d (also called **side mic level**). Here's how you do that, depending on your Zoom model. If you tell me which model you have (e.g., H5, H6, M3, F8, etc.), I can give specific steps.\n\n---\n\n## What does \u201cMS-RAW\u201d mode mean?\n\n- MS-RAW mode records the **mid (M)** microphone signal to one channel (usually left) and the **side (S)** microphone signal to the other (right). ([zoomcorp.com](https://zoomcorp.com/manuals/h2essential-en/?utm_source=openai))  \n- Because the raw S (side) signal is separated, you can adjust how much side signal is mixed into the stereo image *after* recording (or during playback) to make the recording **wider** or **narrower**. ([manualslib.com](https://www.manualslib.com/manual/895844/Zoom-H5.html?page=31&utm_source=openai))  \n\n---\n\n## How to adjust stereo width (side mic level)\n\nHere's how to change the width on some common Zoom recorders:\n\n| Model | How to adjust side mic / width |\n|-------|------------------------------|\n| **Zoom H6** | On the home screen, use the up/down buttons to adjust side mic level. You can set it \u201cOff\u201d, from -24 dB to +6 dB, or to \u201cRAW\u201d which allows adjustability during playback. ([manualslib.com](https://www.manualslib.com/manual/591923/Zoom-H6.html?page=33&utm_source=openai)) |\n| **Zoom H5** | Similar: when using an MS capsule and in MS-RAW mode, use side mic level controls to adjust from Off, -24 dB \u2192 +6 dB, or RAW. During playback, you can change it (if recorded in RAW mode). ([manualslib.com](https://www.manualslib.com/manual/895844/Zoom-H5.html?page=31&utm_source=openai)) |\n| **Zoom H2n** | Select MS-RAW mode (must use WAV format). Before recording, press/hold the mode button until \u201cRAW\u201d appears to enable proper setting. You can also adjust the \u201cS level\u201d (side) between Off, Raw, or -24 to +6 dB. ([zoom.co.jp](https://www.zoom.co.jp/sites/default/files/products/downloads/pdfs/H2n_operationManual_English.pdf?utm_source=openai)) |\n| **Zoom F8** | On tracks using MS mic capsule, press the track, then adjust \u201cSide Mic Level\u201d before recording. Same range: Off, Raw, or from -24 to +6 dB. ([manualslib.com](https://www.manualslib.com/manual/957991/Zoom-F8.html?page=71&utm_source=openai)) |\n| **Zoom M3** | Use the **M3 Edit & Play** software (on computer) to adjust stereo width for MS-RAW files during playback or export. Within the app you\u2019ll find a slider for stereo width that sets the angle (e.g. 90\u00b0, 120\u00b0, etc.), or you might change the side mic level to RAW to unlock post-adjustability. ([zoomcorp.com](https://zoomcorp.com/en/us/software-product-page/software-sub-cat/m3-edit-and-play/?utm_source=openai)) |\n\n---\n\n## Steps for changing stereo width on a general Zoom recorder\n\nIf your recorder is like the ones above:\n\n1. Put the recorder in **MS-RAW** recording mode. This is usually done via the **Rec** menu \u2192 \u201cStereo Format\u201d or \"Mic Capsule\" menu, selecting **MS RAW**. Must use **WAV** format on models that restrict it. ([zoomcorp.com](https://zoomcorp.com/manuals/h2essential-en/?utm_source=openai))  \n2. On the home screen or track settings, locate \u201cSide Mic Level\u201d or \u201cS level\u201d. This controls how much side mic contributes to the stereo image. ([manualslib.com](https://www.manualslib.com/manual/591923/Zoom-H6.html?page=33&utm_source=openai))  \n3. Adjust with up/down buttons or slide/knob. You can select fixed dB (negative or positive) or choose \u201cRAW\u201d if available. RAW gives you maximum flexibility afterward, but requires post-processing or use of Zoom\u2019s MS decoding tools or apps. ([manualslib.com](https://www.manualslib.com/manual/895844/Zoom-H5.html?page=31&utm_source=openai))  \n4. If you recorded in RAW, you can later open that file in Zoom\u2019s software (M3 Edit & Play, MS Decoder, or a DAW with MS decoding) to tweak the width. ([manualslib.com](https://www.manualslib.com/manual/895844/Zoom-H5.html?page=31&utm_source=openai))  \n\n---\n\nIf you tell me the exact model you\u2019re using, I\u2019ll give you the precise steps and where to go in the menus."
    },
    {
        "role": "user",
        "content": "h2essential"
    },
    {
        "role": "assistant",
        "content": "On the Zoom H2essential, there *isn\u2019t* a way to change the stereo width (side mic level) directly on the unit when recording in **MS RAW** mode. The unit lets you record the mid mic and side mic signals separately (MS RAW), but doesn\u2019t include onboard adjustment of the side level to change width at recording time. Here are how the relevant features work and how you *can* adjust it later:\n\n---\n\n## What the H2essential *can* do\n\n- You can set the stereo pickup angle to **90\u00b0 or 120\u00b0** which affects how the mid & side mics are blended during normal stereo recording (not in RAW). This is selected with the \u201cPickup Pattern\u201d buttons. ([zoomcorp.com](https://zoomcorp.com/manuals/h2essential-en/?utm_source=openai))  \n- You can enable **MS RAW** mode via the menu (Menu \u2192 Rec \u2192 Stereo Format \u2192 MS RAW). This makes the unit record the mid mic output to the left channel, the side mic output to the right channel. ([zoomcorp.com](https://zoomcorp.com/media/documents/E_H2essential.pdf?utm_source=openai))  \n- Names of files recorded in MS RAW mode have \u201c_RAW\u201d at the end. ([zoomcorp.com](https://zoomcorp.com/media/documents/E_H2essential.pdf?utm_source=openai))  \n- MS RAW isn\u2019t available when using an external mic on the MIC/LINE IN jack; in that case even if you set MS RAW, the unit does normal stereo instead. ([zoomcorp.com](https://zoomcorp.com/manuals/h2essential-en/?utm_source=openai))  \n\n---\n\n## What it *doesn\u2019t* do / limitations\n\n- The H2essential does *not* let you adjust the **side mic level** during recording (i.e. no dB offset or width control like many dedicated MS recorders).  \n- There is no \u201cside mic level\u201d control built into the menus or buttons for adjusting how wide the MS stereo field is on the fly. The user manual confirms that while MS RAW preserves the separate signals, altering stereo width must happen in post-production. ([zoomcorp.com](https://zoomcorp.com/manuals/h2essential-en/?utm_source=openai))  \n\n---\n\n## How to get a different stereo width\n\nSince you can\u2019t change the side mic level on the H2essential itself, here\u2019s how to adjust stereo width after recording:\n\n1. Record in **MS RAW** mode. Be sure to choose a pickup pattern of **90\u00b0 or 120\u00b0**, and avoid using external mic/line input if you want RAW mode.  \n2. Bring the RAW file into a **Digital Audio Workstation (DAW)** or software that supports MS stereo decoding (for example, Adobe Audition, Reaper, Audacity with MS plugin, etc.).  \n3. Use an MS decoder or plugin, which combines the L (mid) and R (side) channels. By adjusting the level of the side (S) signal relative to the mid (M) signal, you can widen or narrow the stereo image:  \n   - Reduce the side level \u2192 narrower stereo  \n   - Increase the side level \u2192 wider stereo  \n   - You can even mute the side for mono if desired  \n\n4. Apply any smoothing or balancing as needed, then export to your preferred stereo format.\n\n---\n\nIf you\u2019d like, I can walk you through a specific DAW setup to decode MS RAW and adjust width after recording. Do you use one already (e.g. Reaper, Logic, Audacity)?"
    },
    {
        "role": "user",
        "content": "zoom%20has%20such%20a%20decoder.%20where%20do%20I%20find%20it"
    },
    {
        "role": "assistant",
        "content": "Zoom provides its own free utility called **\u201cZOOM MS Decoder\u201d** that lets you convert MS-RAW recordings (like those from the H2n, H5, etc.) into standard stereo, and also lets you adjust the side mic level (stereo width) during playback. Below are the details and how to get it.\n\n---\n\n## What is ZOOM MS Decoder\n\n- It\u2019s a utility by Zoom specifically for handling recordings made in **MS-RAW mode**. When you record in RAW, you capture Mid (M) and Side (S) channels separately. The decoder can recombine them into stereo so that they can be listened to properly or imported into other audio software. ([zoomcorp.com](https://zoomcorp.com/documents/3362/MSDecoder_Mac_Software_Version_History_1206_en_T4uF5ox.pdf?utm_source=openai))  \n- When playing back a RAW file through the decoder, you can adjust the `Side` (S) level (\u201cside mic level\u201d) \u2013 increasing or decreasing it\u2014to set your stereo width to your liking. ([zoom.co.jp](https://www.zoom.co.jp/sites/default/files/products/downloads/pdfs/E_H5_0.pdf?utm_source=openai))  \n\n---\n\n## Where to find & download it\n\n1. **Official Zoom website** \u2014 Visit Zoom\u2019s product support or software download pages. They're especially listed under software tools for specific recorder models.  \n   - For example: \u201cMS Decoder for Macintosh (64bit)\u201d is available on the Zoom site. ([zoomcorp.com](https://zoomcorp.com/documents/3362/MSDecoder_Mac_Software_Version_History_1206_en_T4uF5ox.pdf?utm_source=openai))  \n   - Also, in the H5 (and similar models\u2019) operation manual, it mentions using \u201cZOOM MS Decoder\u201d or other plug-in software to convert RAW to normal stereo after recording. ([zoom.co.jp](https://www.zoom.co.jp/sites/default/files/products/downloads/pdfs/E_H5_0.pdf?utm_source=openai))  \n\n2. **Direct link size** \u2014 The manual for the H2n (and H5) points to a software page:  \n   > \u201cUse ZOOM MS Decoder or other plug-in software that can convert it to normal stereo.\u201d ([zoom.co.jp](https://www.zoom.co.jp/sites/default/files/products/downloads/pdfs/E_H5_0.pdf?utm_source=openai))  \n  \n   This usually means there\u2019s a page associated with the H2n software bundle (or whichever model) where MS Decoder is included. Sometimes the link is referred within the model\u2019s software download page, often visibly named something like \u201cH2n Software\u201d or \u201cMS Decoder\u201d.  \n\n---\n\n## How to use it\n\nWhen you have the MS Decoder installed:\n\n- Load the `.wav_RAW` file from your recorder.\n- The tool will let you change the side mic\u2019s gain \u2013 usually via a slider or control marked \u201cSide Mic Level\u201d or similar.\n- You output or save the result as a normal stereo file (mid and side mixed) once you're happy with the width.  \n\n---\n\nIf you like, I can pull up the exact download link for *your platform* (Windows or Mac) so you can grab ZOOM MS Decoder right now. Which OS are you using?"
    },
    {
        "role": "user",
        "content": "windows"
    },
    {
        "role": "assistant",
        "content": "Here\u2019s how to find and download the **Zoom MS Decoder** (Windows version) and related tools, plus alternatives in case the official version isn\u2019t available:\n\n---\n\n## \ud83c\udfaf Official Windows MS Decoder from Zoom\n\n- According to Zoom\u2019s Applications page, there *is* an MS Decoder **VST plugin** for certain models (H2n, H5, H6 Black, H8, M3) in **Windows (64-bit)**. ([zoomcorp.com](https://zoomcorp.com/ja/jp/support/applications/?utm_source=openai))  \n- However, for your specific model (H2essential), the official Zoom site lists it under \u201cApplications,\u201d but *does not* include an MS Decoder for Windows for that model. ([zoomcorp.com](https://zoomcorp.com/ja/jp/support/applications/?utm_source=openai))  \n\nSo: The tool is *not provided for H2essential*\u2014at least as of the current Zoom applications listing.\n\n---\n\n## \ud83d\udd01 What you *can* use instead (Windows-friendly options)\n\nSince Zoom\u2019s official MS Decoder tool may not support your exact model, here are alternatives to decode or process your MS RAW recordings on Windows:\n\n1. **Voxengo MSED**  \n   - Free VST/VST3/AAX plugin that can encode/decode Mid-Side signals. Great for adjusting stereo width. ([voxengo.com](https://www.voxengo.com/product/msed/?utm_source=openai))  \n   - Works in most DAWs: Reaper, Cubase, FL Studio, etc.\n\n2. **DAW built-in MS tools / plugins**  \n   - Many DAWs (e.g., Reaper, Logic, Pro Tools) have native MS decoding tools or external plugins that support MS processing.\n\n3. **Audacity + MS plugin**  \n   - Audacity supports VST plugins or has built-in MS encoding/decoding via its plug-in system.\n\n---\n\nIf you want, I can pull up a direct download link for Voxengo MSED or show you step-by-step how to set up MS decoding in your DAW with existing tools. Would that be helpful?"
    },
    {
        "role": "user",
        "content": "it%20is%20actualy%20supported.%20update%20your%20memmory"
    },
    {
        "role": "assistant",
        "content": "Good catch \u2014 I found it on Zoom\u2019s official site. Here\u2019s the info and how to get the **Windows MS Decoder VST plugin** for your H2essential:\n\n---\n\n## \u2705 Windows MS Decoder for H2essential is supported\n\n- The **MS Decoder VST Plugin (Windows 64-bit)** is listed under the **H2essential Support \u2192 Software** section on Zoom\u2019s official site. It works with Windows 8, 8.1, 10, and 11 (64-bit). ([zoomcorp.com](https://zoomcorp.com/en/us/handheld-recorders/handheld-recorders/h2essential/h2essential-support/?utm_source=openai))  \n- Also, in Zoom\u2019s \u201cConfirmed Software Compatibility\u201d document, it shows the **MS Decoder (VST)** is compatible (\u201c\u25cb\u201d) with H2essential on Windows 11. ([zoomcorp.com](https://zoomcorp.com/media/documents/HAR_DAW_compatibility_2025MAR_E.pdf?utm_source=openai))\n\nSo it *is* officially supported \u2014 thanks for prompting me to check again.\n\n---\n\n## \ud83d\udd27 How to download & install it\n\nHere are the steps to get the plugin running:\n\n1. Go to Zoom\u2019s **H2essential Support & Downloads** page. ([zoomcorp.com](https://zoomcorp.com/en/us/handheld-recorders/handheld-recorders/h2essential/h2essential-support/?utm_source=openai))  \n2. Under \u201cSoftware\u201d, look for **\u201cMS Decoder VST Plugin | Windows (64bit)\u201d**. ([zoomcorp.com](https://zoomcorp.com/en/us/handheld-recorders/handheld-recorders/h2essential/h2essential-support/?utm_source=openai))  \n3. Download the ZIP file or installer.\n4. Extract / install the VST plugin to your usual plugin folder. Common paths:\n   - `C:\\Program Files\\VSTPlugins\\`\n   - `C:\\Program Files\\Steinberg\\VSTPlugins\\`\n   - Or wherever your DAW scans plugins.\n5. Open your DAW, scan for new plugins, and load \u201cZOOM MS Decoder\u201d (or similar name per Zoom\u2019s naming).\n\n---\n\n## \ud83c\udf9a What you can do with it\n\nOnce loaded in your DAW, the MS Decoder plugin lets you:\n\n- Import or route the two channels from your MS RAW recording (Mid = Left, Side = Right).\n- Adjust the **side mic (S)** level relative to the mid mic (M) to widen or narrow the stereo field.\n- Decode the MS to standard stereo output so it behaves like a normal stereo track.  \n\n---\n\nIf you tell me which DAW you\u2019re using (Reaper? Audacity? Logic? Others?), I can guide you through the exact steps to use the plugin in your workflow."
    }
]