[
    {
        "role": "user",
        "content": "how%20do%20you%20fix%20this%20problem%20in%20reaper%20when%20it%20comes%20up%20on%20a%20mic%3F%20WASAPI%20shared%20mode%20device%20error%3A%20input%20device%20sample%20rate%20does%20not%20match%20output%20device%20samplerate!%20You%20should%20change%20the%20device%20samplerates%20in%20the%20control%20panel%20to%20match%2C"
    },
    {
        "role": "assistant",
        "content": "Here\u2019s how you can resolve the \u201cWASAPI shared mode device error: input device samplerate does not match output device samplerate!\u201d issue in Reaper.\n\n---\n\n## What the error means\n\n- In **WASAPI Shared mode**, Windows requires that the **input (microphone) device** and **output (speakers/headphones)** have matching sample rates (e.g. both 44,100 Hz or both 48,000 Hz). ([forum.juce.com](https://forum.juce.com/t/wasapi-sampling-rate-problem/37887?utm_source=openai))  \n- Reaper checks Windows audio settings; if the input and output devices are set to different sample rates in the system Sound Control Panel, it refuses to open audio hardware. ([github.com](https://github.com/dechamps/FlexASIO/issues/23?utm_source=openai))  \n\n---\n\n## How to fix it\n\nHere are step-by-step solutions you can try.\n\n### 1. Match sample rates in Windows Sound settings\n\n1. Right-click the speaker icon in the system tray \u2192 select **Sounds** (or \u201cOpen Sound settings\u201d \u2192 \u201cSound Control Panel\u201d).  \n2. Under **Playback**, find your output device \u2192 right-click \u2192 Properties.  \n3. Go to the **Advanced** tab \u2192 set \u201cDefault Format\u201d (sample rate + bit depth) to your desired format (e.g. 48000 Hz, 24 bit).  \n4. Under **Recording**, select your input device \u2192 Properties \u2192 Advanced \u2192 set its Default Format to **the same exact** sample rate and bit depth.  \n5. Apply changes and restart Reaper to ensure they take effect.  \n\nReddit users have confirmed that doing this fixed the shared-mode error. ([reddit.com](https://www.reddit.com/r/Reaper/comments/u6lkuj?utm_source=openai))\n\n---\n\n### 2. Change Reaper\u2019s audio settings\n\n- In Reaper \u2192 **Options \u2192 Preferences \u2192 Audio \u2192 Device**  \n  - Make sure **Audio System** is set to **WASAPI**.  \n  - Use **Shared mode** if you want to hear other programs while using Reaper.  \n  - Set **sample rate** in Reaper to match what you set in Windows (if it allows).  \n  - If there's a checkbox for \u201cAllow projects to override device sample rate,\u201d you may need to disable it so that Reaper follows the system setting. ([reddit.com](https://www.reddit.com/r/Reaper/comments/1agmgmv?utm_source=openai))  \n\n---\n\n### 3. Use Exclusive mode if matching sample rates isn\u2019t possible\n\n- If you can\u2019t set both devices to the same sample rate (maybe your mic only supports 44.1 kHz, but your speakers are at 48 kHz), switch to **Exclusive mode** in Reaper\u2019s WASAPI settings.  \n- **Exclusive mode** allows Reaper to take full control of the audio device, bypassing the shared-mode restrictions. ([reddit.com](https://www.reddit.com/r/Reaper/comments/1c5qa80?utm_source=openai))  \n\nNote: Other applications might be muted or blocked while Reaper has exclusive control.\n\n---\n\n### 4. Close conflicting apps / disable exclusive control elsewhere\n\n- Sometimes another app or service holds the device at a sample rate that conflicts with your selected one (ex: browsers, chat apps, music players).  \n- Also check in **Sound Control Panel \u2192 device Properties \u2192 Advanced tab \u2192 Exclusive Mode**: ensure that \u201cAllow applications to take exclusive control of this device\u201d is either disabled or configured so nothing else grabs a different samplerate. ([forum.cockos.com](https://forum.cockos.com/archive/index.php/t-199153.html?utm_source=openai))  \n\n---\n\n## Troubleshooting checklist\n\n| What to check | Why it matters |\n|--------------------------|-------------------------|\n| Both input & output device sample rates in Windows match | Needed for WASAPI Shared mode to work without error. ([forum.juce.com](https://forum.juce.com/t/wasapi-sampling-rate-problem/37887?utm_source=openai)) |\n| Reaper\u2019s sample rate matches Windows | Prevents mismatch errors when Reaper starts audio engine. |\n| Exclusive mode is available | Allows working around mismatch issues. |\n| No other programs forcing a different rate | Prevents conflicts. |\n| Mic or interface supports chosen sample rate | Some devices don\u2019t support 48 kHz, etc. If they don\u2019t, you\u2019ll need to use a sample rate both support. |\n\n---\n\nIf you tell me which sample rates your mic and speakers are showing, or which Windows version you're on, I can walk you through exactly what numbers to enter."
    },
    {
        "role": "user",
        "content": "what%20should%20the%20correct%20sample%20rate%20be%20set%20to%20in%20control%20pannel%20for%20the%20Apogee%20Hype%20mic%20for%20it%20to%20work%20in%20Reaper%3F%20and%20if%20I%20unplug%20it%20and%20use%20it%20again%20later%2C%20will%20it%20remember%20it%3F"
    },
    {
        "role": "assistant",
        "content": "Here\u2019s what you need to know to use your Apogee HypeMiC in Reaper without sample rate mismatches \u2014 what the correct sample rate should be, and whether settings will \u201cstick\u201d when you unplug and plug the mic later.\n\n---\n\n## What sample rate should you set?\n\nThe Apogee HypeMiC USB microphone supports up to **24-bit / 96 kHz** A/D conversion (i.e. recording quality) with Windows, Mac, and iOS. ([bhphotovideo.com](https://www.bhphotovideo.com/c/product/803391074-USE/apogee_electronics_hype_mic_hypemic_usb_cardioid_condenser.html/specs?utm_source=openai))\n\nTo avoid the WASAPI shared-mode error (\u201cinput device samplerate does not match output device samplerate\u201d) in Reaper, the safest approach is:\n\n- Set **both** your microphone (input) and your speakers/headphones (output) to the same sample rate in Windows Sound settings.\n- Use **96 kHz** ONLY if your output device (speakers/headphones/interface) supports it well.\n- If you're unsure or your speakers don\u2019t support 96 kHz, **48 kHz** is a more commonly supported standard, and will avoid many compatibility issues.\n\nSo:\n\n- If you want full fidelity: set Windows \u2192 Sound control panel \u2192 Playback and Recording properties to **96 000 Hz, 24-bit**.\n- If that causes problems or compatibility issues, set both input and output to **48 000 Hz, 24-bit**.\n\n---\n\n## Will the settings remember after unplugging?\n\nIn most cases, yes \u2014 but there are caveats:\n\n- Windows **usually remembers** the default format (sample rate + bit depth) you set for each device, even after it's unplugged and replugged.\n- However, sometimes USB devices revert to a default format when they\u2019re reconnected, especially if another software overrides them or if Windows resets them (e.g., firmware issues or driver interactions). Some users report the input device going back to 44.1 kHz on reboot or replug. ([reddit.com](https://www.reddit.com/r/techsupport/comments/1sage1s/usb_audio_interface_resets_mic_sample_rate_to_441/?utm_source=openai))\n- Recording apps like Reaper may also default project settings to what Reaper was previously using, which can cause conflicts if Windows has changed.\n\n---\n\n## What you should do to avoid having to fix it every time\n\nTo make sure things \u201cjust work\u201d:\n\n1. **Immediately after plugging in HypeMiC**, check Windows Sound Control Panel:\n   - Under **Playback**, set output device format to 96 000 Hz / 24-bit (or 48kHz if needed).\n   - Under **Recording**, set HypeMiC\u2019s \u201cDefault Format\u201d to match exactly.\n\n2. In **Reaper Preferences \u2192 Audio \u2192 Device**, with WASAPI in use:\n   - Choose \u201cShared mode\u201d if you want Reaper and other apps to share audio.\n   - Set Reaper\u2019s sample rate (or the project rate) to match what you set in Windows (96 kHz or 48 kHz).\n   - If Reaper has a \u201cfollow device sample rate\u201d or \u201cuse Windows default format\u201d setting, enable that.\n\n3. When saving a Reaper project, **confirm the project sample rate** \u2014 especially if you did anything at a different rate (Reaper will warn you if they don\u2019t match).\n\n4. If using other audio gear/software (DAWs, streaming, etc.), make sure those support the rate you chose (96 or 48 kHz). If not, 48 kHz is safer.\n\n---\n\nIf you want, I can walk you through setting exactly 96 kHz or 48 kHz in the Windows settings step-by-step (with screenshots), so you know where to look."
    },
    {
        "role": "user",
        "content": "how%20do%20you%20make%20a%20quick%20recording%20in%20reaper%3F"
    },
    {
        "role": "assistant",
        "content": "Here\u2019s how you can make a quick recording in Reaper \u2014 fast setup so you can hit \u201crecord\u201d as soon as possible.\n\n---\n\n## Quick Recording in Reaper \u2014 Steps\n\n1. **Open Reaper**  \n   Launch Reaper on your computer.\n\n2. **Set up your input device**  \n   - Go to `Options \u2192 Preferences \u2192 Audio \u2192 Device`.  \n   - Select your audio system (often **WASAPI**, **ASIO**, or **DirectSound**) depending on your input device.  \n   - Choose your input (mic, interface) and output (speakers/headphones) devices.  \n   - Make sure the sample rate is matched or appropriate.  \n\n3. **Create a new track**  \n   - Press `Ctrl + T` (Cmd + T on Mac) to create a new track.  \n   - On the new track, click the **Record Arm** button (red \u201carm\u201d button).  \n\n4. **Select audio input**  \n   - On that track, find the input dropdown (it may say \u201cInput: Mono\u201d or \u201cInput: Stereo\u201d).  \n   - Choose the correct input channel (e.g. your mic or interface\u2019s input 1).  \n\n5. **Check monitoring** (optional)  \n   - If you want to hear yourself while recording, enable **Record Monitoring** (usually a speaker icon) on the track.  \n   - If you hear problems, adjust buffer sizes or disable monitoring temporarily.\n\n6. **Set project sample rate** (optional if it already matches)  \n   - In Reaper, look at the bottom-right corner; click where it says sample rate (e.g. 48000 Hz).  \n   - Set it to match your audio interface / input device.\n\n7. **Record!**  \n   - Press `Ctrl + R` (Cmd + R) or click the big *Record* button on the transport bar.  \n   - Do your take.  \n   - Press `Spacebar` or the Stop button when done.\n\n8. **Save your project or export audio**  \n   - The recording appears on the track as a \u201cmedia item.\u201d You can save the project (`File \u2192 Save`) to retain your work for later.  \n   - To bounce/export, go to `File \u2192 Render\u2026` and choose format (e.g. WAV, MP3), destination folder, etc.\n\n---\n\nIf you tell me whether you're using Windows or Mac, I can give you the exact hotkeys and any platform-specific tips."
    },
    {
        "role": "user",
        "content": "how%20do%20you%20make%20a%20quick%20recording%20in%20reaper%20when%20using%20jaws%3F"
    },
    {
        "role": "assistant",
        "content": "If you're using the **JAWS screen reader** and want to make a quick recording in **REAPER**, here are steps optimized for keyboard navigation and accessible tools. I\u2019ll assume you have the **OSARA** extension installed \u2014 it adds helpful navigation and feedback designed for screen reader users. ([osara.reaperaccessibility.com](https://osara.reaperaccessibility.com/?utm_source=openai))\n\n---\n\n## Before starting\n\n- Make sure OSARA is installed and enabled. OSARA improves accessibility by letting JAWS users navigate tracks, items, markers, and more in REAPER. ([osara.reaperaccessibility.com](https://osara.reaperaccessibility.com/?utm_source=openai))\n- Ensure the proper audio input and output are set in REAPER\u2019s preferences ( your mic, Apogee HypeMiC, etc.).\n- Confirm sample rates match if using WASAPI Shared mode.  \n\n---\n\n## Quick Recording Steps using keyboard + JAWS\n\nThese steps assume focus is in the main **Arrange View** of REAPER.\n\n| Step | Action | Default Keyboard Shortcut |\n|------|--------|-----------------------------|\n| 1 | Create a new track | **Ctrl + T** ([makeuseof.com](https://www.makeuseof.com/reaper-daw-beginner-guide/?utm_source=openai)) |\n| 2 | Select that track (if not auto selected) | Use **Up** / **Down Arrow** until focus lands on the new track (OSARA reads track names while navigating) ([reaperaccessibility.com](https://reaperaccessibility.com/wiki/Special%3AMyLanguage/Keyboard_Shortcuts?utm_source=openai)) |\n| 3 | Arm track for recording | Press **Ctrl + Shift + R** (default for toggle record arm) ([audeobox.com](https://www.audeobox.com/learn/reaper/reaper-keyboard-shortcuts-cheat-sheet/?utm_source=openai)) |\n| 4 | Select input source (if needed) | *No default hotkey.* Use `Alt + I` to open **Track Input/Output** settings\u2014 you may need to tab through menus or use OSARA\u2019s context-menu reporting to choose your mic. OSARA can help by reporting when the input is set. ([osara.reaperaccessibility.com](https://osara.reaperaccessibility.com/?utm_source=openai)) |\n| 5 | Start recording | Press **Ctrl + R** to record. ([audeobox.com](https://www.audeobox.com/learn/reaper/reaper-keyboard-shortcuts-cheat-sheet/?utm_source=openai)) |\n| 6 | Stop recording | Press **Spacebar** or **Ctrl + R** again. ([reaper.fm](https://www.reaper.fm/userguide/ReaperUserGuide703c.pdf?utm_source=openai)) |\n| 7 | Save project (optional) | Press **Ctrl + S** to save the project. |\n\n---\n\n## Tips for smoother workflow using JAWS + OSARA\n\n- Use **Shortcut Help** in REAPER by pressing `F12`. This lets you press any key combination and hear what action it triggers. Great for discovering or confirming shortcuts. ([reaperaccessibility.com](https://reaperaccessibility.com/wiki/Special%3AMyLanguage/Keyboard_Shortcuts?utm_source=openai))\n- If you don\u2019t like default record shortcuts, you can customize them via **Actions \u2192 Show Action List**, search for \u201cTransport: Record\u201d, then add or change a shortcut to something easier for you to remember. ([reaperaccessibility.com](https://reaperaccessibility.com/wiki/Special%3AMyLanguage/Keyboard_Shortcuts?utm_source=openai))\n- OSARA provides feedback (via JAWS) when you arm/disarm a track, when you're on a track, when things like mute/solo change. Use arrow keys (Up/Down) to navigate tracks so OSARA can report. ([osara.reaperaccessibility.com](https://osara.reaperaccessibility.com/?utm_source=openai))\n\n---\n\nIf you want, I can map out **exact keystrokes and navigation paths** specifically for your setup (e.g. using WASAPI, your Apogee mic), to minimize guessing or trial & error."
    },
    {
        "role": "user",
        "content": "how%20do%20you%20use%20shared%20mode%20in%20reaper%20if%20the%20audio%20devices%20do%20not%20match.%20I%27ve%20already%20changed%20it%20the%20control%20pannel"
    },
    {
        "role": "assistant",
        "content": "When using **WASAPI Shared Mode** in REAPER, the system requires that both the **input** and **output** audio devices run at exactly the **same sample rate**. If they don\u2019t match, REAPER will throw an error like:\n\n> \u201cinput device samplerate does not match output device samplerate!\u201d ([reddit.com](https://www.reddit.com/r/Reaper/comments/1c5qa80?utm_source=openai))\n\nSince you\u2019ve already set the matching sample rates in Control Panel and still have problems, here are steps and workarounds you can try:\n\n---\n\n## Double-check every sample rate in Windows\n\nEverything must be aligned\u2014even devices you may not be thinking about.\n\n1. Open **Sound Control Panel \u2192 Playback \u2192 Right-click your output device \u2192 Properties \u2192 Advanced**. Ensure \u201cDefault Format\u201d is set to your desired sample rate (for example, **48 kHz / 24 bit**).  \n2. Do the same under **Recording** for your input device (mic/interface).  \n3. Also check any **other audio devices** that might be enabled\u2014even if not active. Sometimes Windows has hidden devices or default devices that have a different rate. These can block the shared audio system. Users report that matching *all* devices with the same sample rate usually fixes the shared-mode error. ([reddit.com](https://www.reddit.com/r/Reaper/comments/u6lkuj?utm_source=openai))\n\n---\n\n## Ensure Reaper\u2019s settings match\n\nEven though Windows is correct, REAPER must also agree.\n\n- Go to **Options \u2192 Preferences \u2192 Audio \u2192 Device** in REAPER.\n- Make sure the audio system is set to **WASAPI \u2013 Shared mode**.\n- Confirm that the selected input and output devices are the same ones you set in Windows Sound.  \n- Set the **sample rate** here to the same (e.g., 48 kHz or 96 kHz) if REAPER allows editing it. Note: in shared mode the sample rate in REAPER may sometimes be forced by Windows if \u201cUse Windows default format\u201d is checked. ([forums.cockos.com](https://forums.cockos.com/showthread.php?t=213459&utm_source=openai))\n\n---\n\n## What to try if matching doesn\u2019t resolve it\n\nIf everything matches\u2014and you still get the error\u2014try one of the following:\n\n- **Exclusive Mode**: This mode bypasses Windows shared audio mixing. REAPER becomes the only application using the device. You\u2019ll have more control over sample rate and bit depth, but other programs (e.g. system sounds, media players) won\u2019t be heard while recording. ([reddit.com](https://www.reddit.com/r/Reaper/comments/1c5qa80?utm_source=openai))  \n- **Unified hardware**: Use the same physical device for both input and output (mic + headphones through the same interface). Shared mode is more reliable when Windows is dealing with one device rather than trying to mix multiple devices with different hardware clocks. ([reddit.com](https://www.reddit.com/r/Reaper/comments/1c5qa80?utm_source=openai))  \n- **Disable or close apps that grab audio**: Sometimes other programs (like web browsers, Spotify, etc.) are holding audio at a different sample rate. Closing those or stopping their audio playback can allow Windows to switch formats properly. ([reddit.com](https://www.reddit.com/r/Reaper/comments/1c5qa80?utm_source=openai))  \n- **Use ASIO driver**: If your audio interface supports ASIO, using its ASIO driver often gives more flexibility. ASIO avoids some of the restrictions of WASAPI Shared mode. ([reddit.com](https://www.reddit.com/r/Reaper/comments/1iz872a?utm_source=openai))\n\n---\n\nIf you tell me the exact sample rates you've set (for input, output, and in Reaper), and your audio driver type (WASAPI, ASIO, etc.), I can help troubleshoot with more precise steps."
    },
    {
        "role": "user",
        "content": "how%20do%20you%20make%20sure%20a%20track%20is%20selected%20in%20reaper%2C%20arm%20it%20for%20recording%2C%20stop%20the%20recording%20then%20play%20it%20back%20when%20using%20reaper%20with%20jaws%3F"
    },
    {
        "role": "assistant",
        "content": "Here are the step-by-step instructions for selecting a track, arming it, recording, stopping, and playing back in REAPER **using JAWS + OSARA**. These steps assume you\u2019re using Windows, REAPER with OSARA installed, and JAWS as your screen reader.\n\n---\n\n## Pre-requisites\n\n- REAPER installed (version 6.44 or newer works best for OSARA) ([reaperaccessible.fr](https://reaperaccessible.fr/index.php?Itemid=236&catid=72&id=482%3Aosara-open-source-accessibility-for-the-reaper-application&lang=en-us&option=com_content&view=article&utm_source=openai))  \n- OSARA extension installed and active ([osara.reaperaccessibility.com](https://osara.reaperaccessibility.com/?utm_source=openai))  \n- JAWS screen reader running\n\n---\n\n## Full sequence: select \u2192 arm \u2192 record \u2192 stop \u2192 play (with keyboard only)\n\nHere\u2019s the entire process, with keystrokes:\n\n| Step | What to do | Key/Shortcut | What JAWS/OSARA will announce or report |\n|---|---------------------------|------------------------------|--------------------------------------------|\n| **1. Create a new project or open existing** | Open REAPER, make sure you\u2019re in Arrange View | \u2014 | OSARA will read \u201cproject blank\u201d if new, or list existing tracks |\n| **2. Create a new track** | Press `Ctrl + T` | `Ctrl + T` | OSARA: announces \u201cNew track, track 1\u201d (or next number) ([reaperaccessibility.com](https://reaperaccessibility.com/wiki/Making_Your_First_Recording?utm_source=openai)) |\n| **3. Select the track** | With focus in the track control area, press **Down Arrow** or **Up Arrow** until you hear \u201cTrack 1\u201d (or desired track) | `Down` / `Up` | OSARA: reads track number/name as you navigate ([osara.reaperaccessibility.com](https://osara.reaperaccessibility.com/?utm_source=openai)) |\n| **4. Assign the input (if needed)** | Press `Applications key` (or `Shift+F10`) to open the track input context menu. Use arrows to find \u201cInput: Mono\u201d (or Stereo), then choose the correct input channel | `Applications` \u2192 arrows \u2192 `Enter` | Screen reader will speak \u201cTrack input: Input 1\u201d etc. ([reaperaccessibility.com](https://reaperaccessibility.com/wiki/Making_Your_First_Recording?utm_source=openai)) |\n| **5. Arm the track for recording** | Press `F7` (toggles arm / unarm for the selected track) | `F7` | OSARA announces \u201cTrack 1 armed\u201d (or \u201cunarmed\u201d) ([reaperaccessibility.com](https://reaperaccessibility.com/wiki/Making_Your_First_Recording?utm_source=openai)) |\n| **6. Set monitoring mode (optional)** | Press `F8` to toggle through monitoring modes (normal, off, not when playing) if you want to hear input through headphones/speakers | `F8` | OSARA will announce the monitoring setting (e.g. \u201cnormal monitoring\u201d) ([reaperaccessibility.com](https://reaperaccessibility.com/wiki/Making_Your_First_Recording?utm_source=openai)) |\n| **7. Begin recording** | Press `R` to start recording | `R` | OSARA (and JAWS) should say \u201cRecording started\u201d, maybe give position updates as recording proceeds ([reaperaccessibility.com](https://reaperaccessibility.com/wiki/Making_Your_First_Recording?utm_source=openai)) |\n| **8. Stop recording** | Press `Spacebar` or press `R` again (or `Ctrl + R`) to stop | `Space` or `R` | OSARA: \u201cRecording stopped\u201d ([reaperaccessibility.com](https://reaperaccessibility.com/wiki/Making_Your_First_Recording?utm_source=openai)) |\n| **9. Move edit cursor to start (optional but usual for playback)** | Press `W` (if bound; OSARA uses `W` to move to start of project) ([reaperaccessibility.com](https://reaperaccessibility.com/wiki/Making_Your_First_Recording?utm_source=openai)) |\n| **10. Play back your recording** | Press `Spacebar` to play (or `P` / Play Transport if bound) | `Space` | OSARA: \u201cPlaying back project\u201d (will read position/time as the playhead moves) ([osara.reaperaccessibility.com](https://osara.reaperaccessibility.com/?utm_source=openai)) |\n| **11. Stop playback** | Press `Spacebar` again (or Stop transport) | `Space` | OSARA: \u201cPlayback stopped\u201d etc. |\n\n---\n\n## Tips & Troubleshooting\n\n- Ensure **track is selected**: Unless the track is selected (via Up/Down arrows), arming and other actions may not apply. OSARA will tell you which track is selected. ([osara.reaperaccessibility.com](https://osara.reaperaccessibility.com/?utm_source=openai))\n- If **nothing happens** when you press `F7`, check that the track is selected and you\u2019re using the **OSARA keymap**. ([osara.reaperaccessibility.com](https://osara.reaperaccessibility.com/?utm_source=openai))\n- Make sure your **transport shortcuts** (`R`, `Space`) are in place. If they\u2019ve been changed or unassigned, use REAPER\u2019s Action List to reassign them. ([reaperaccessibility.com](https://reaperaccessibility.com/wiki/Special%3AMyLanguage/Keyboard_Shortcuts?utm_source=openai))  \n- Adjust **audible feedback** in OSARA settings to make sure record/playback state changes are reported to you. ([osara.reaperaccessibility.com](https://osara.reaperaccessibility.com/?utm_source=openai))  \n\n---\n\nIf you tell me your REAPER version and whether you're using the OSARA or a custom keymap, I can give you exactly what to set (or check) for your setup."
    },
    {
        "role": "user",
        "content": "how%20do%20I%20save%20a%20quick%20recording%20I%27ve%20done%20in%20Reaper%20and%20export%20it%20as%20a%20wav%20file%3F"
    },
    {
        "role": "assistant",
        "content": "Here\u2019s how to **save a quick recording** in REAPER as a WAV file, using only keyboard commands (suitable for someone using JAWS + OSARA or similar screen reader):\n\n---\n\n## 1. Save your Project (optional but helpful)\n\nBefore exporting, you might want to save the REAPER project (*.RPP*) so you can reopen and edit:\n\n- Press **Ctrl + S** \u2192 this opens the \"Save Project\" dialog if the project isn't saved yet.  \n- If needed: Navigate using **Tab** to \u201cFile name\u201d, enter a name, then **Tab** to \u201cSave\u201d and press **Enter**.\n\nThis creates an *.RPP* project file. ([vpl.ca](https://www.vpl.ca/guide/inspiration-lab-reaper-record-and-edit-audio/saving-your-project-reaper?utm_source=openai))\n\n---\n\n## 2. Open the Render dialog\n\n- Press **Ctrl + Alt + R** (default shortcut) to open the **Render to File** dialog. ([homemusiccreator.com](https://homemusiccreator.com/how-to-save-mixdown-in-reaper/?utm_source=openai))\n\n---\n\n## 3. Choose what to render\n\nOnce the Render window is open:\n\n- In the **\u201cSource:\u201d** dropdown, make sure **\u201cMaster mix\u201d** is selected if you want all tracks combined. (Alternatively, you can export only selected tracks or stems if needed.) ([gamedevtraum.com](https://gamedevtraum.com/en/audio-production/how-to-export-audio-in-reaper-detailed-procedure/?utm_source=openai))  \n- In the **\u201cBounds:\u201d** section, choose the time span:  \n  - \u201cEntire project\u201d (if you want the full recording),  \n  - or \u201cTime selection\u201d (if you just want part of it). ([loopmasters.com](https://www.loopmasters.com/articles/2293-Rendering-in-Reaper-for-a-High-Quality-Mixdown?utm_source=openai))\n\n---\n\n## 4. Set output format (WAV)\n\n- Locate the **\u201cPrimary output format\u201d** (often at the bottom of the Render window). ([gamedevtraum.com](https://gamedevtraum.com/en/audio-production/how-to-export-audio-in-reaper-detailed-procedure/?utm_source=openai))  \n- In the **Format** dropdown, select **WAV (typically PCM)**. ([homemusiccreator.com](https://homemusiccreator.com/how-to-save-mixdown-in-reaper/?utm_source=openai))  \n- Choose bit depth and sample rate if needed (16-bit or 24-bit are common; sample rate usually matches your project\u2019s rate). ([homemusiccreator.com](https://homemusiccreator.com/how-to-save-mixdown-in-reaper/?utm_source=openai))\n\n---\n\n## 5. Pick the file name and location\n\n- Press **Tab** to move to the \u201cFile name\u201d field, type what you want the WAV file named.  \n- Tab to \u201cDirectory\u201d or \u201cBrowse\u201d to choose where to save it. Pick a folder you can find easily. ([untidymusic.com](https://untidymusic.com/using-reaper/render-track-reaper-beginners-lesson-3?utm_source=openai))\n\n---\n\n## 6. Render (export) the WAV file\n\n- After all settings are in place (source, bounds, output format, filename, and directory), **Tab** until the **\u201cRender 1 file\u201d** button is focused.  \n- Press **Enter**. This starts the rendering process. When done, your WAV file will be in the folder you chose. ([loopmasters.com](https://www.loopmasters.com/articles/2293-Rendering-in-Reaper-for-a-High-Quality-Mixdown?utm_source=openai))\n\n---\n\nIf you want, I can walk you through exactly where JAWS will announce each field so you can follow without seeing the screen. Do you want that?"
    },
    {
        "role": "user",
        "content": "how%20do%20you%20render%20a%20track%20in%20reaper%20with%20jaws"
    },
    {
        "role": "assistant",
        "content": "Here\u2019s a detailed walkthrough for **rendering/exporting a track** (or your whole project) in REAPER, using JAWS + OSARA, so you can save your work as a WAV or other audio file.  \n\n---\n\n## Prerequisites\n\n- You have **REAPER 6.44 or newer** with the **OSARA** extension/keymap installed.  \n- You are using **JAWS** on Windows (OSARA is compatible with JAWS via MSAA/UIA) so those OSARA keybindings work. ([osara.reaperaccessibility.com](https://osara.reaperaccessibility.com/?utm_source=openai))  \n\n---\n\n## Steps to Render a Track or Project in REAPER with JAWS + OSARA\n\n| Step | Action | Keys / Shortcut | What OSARA/JAWS Will Report |\n|---|--------|------------------|------------------------------|\n| **1. Ensure track(s) selected** | Navigate to the track you want to export. Use **Up Arrow / Down Arrow** to move between tracks. If exporting just one track, make sure only that track is selected. If exporting everything, it\u2019s okay if multiple or all tracks are selected. | `Down Arrow`, `Up Arrow` | OSARA announces the name/number of each track as you move. ([osara.reaperaccessibility.com](https://osara.reaperaccessibility.com/?utm_source=openai)) |\n| **2. Open the Render dialog** | Press `Ctrl + Alt + R` (Windows) | `Ctrl + Alt + R` | OSARA reports \u201cRender to File\u201d dialog opened. ([podtail.com](https://podtail.com/en/podcast/reaproducer-accessible-audio-and-midi-production-w/the-render-and-consolidate-export-tracks-dialogs-r/?utm_source=openai)) |\n| **3. Choose source** | In the Render dialog, select **Source:** from dropdown. If you want the whole mix, choose *Master mix*. If just a track, choose *Stems (selected tracks)* or another relevant option. | Use `Tab` to reach the \u201cSource\u201d field, then arrow keys to change. | OSARA will say what\u2019s currently selected, e.g. \u201cSource: Master mix\u201d or \u201cStems (selected tracks)\u201d. |\n| **4. Set time span (bounds)** | Options like \u201cEntire project\u201d or \u201cTime selection\u201d or other bounds are available. | Tab outward until \u201cBounds:\u201d section, then choose via arrows. | JAWS/OSARA announces which bound is selected. |\n| **5. Set output format** | In \u201cOutput format\u201d or \u201cPrimary format\u201d, choose **WAV (PCM)**, or other format if desired. Also pick sample rate and bit depth (e.g. 16 bit, 24 bit). | Tab to format dropdown, select via arrows. And adjust sample rate/bit depth if needed. | OSARA will speak the format, sample rate, and bit depth selected. |\n| **6. File name and location** | Enter the file name and pick the folder where to save. | Tab to \u201cFile name\u201d field; type name. Tab to \u201cDirectory\u201d or \u201cBrowse\u201d to choose location. | OSARA reads the name as you type; the current directory path as you navigate. |\n| **7. Start rendering** | When everything is set (source, bounds, format, filename, location), Tab until you reach **\u201cRender 1 file\u201d** (or similar). Then press Enter. | `Tab` \u2192 focus on \u201cRender 1 file\u201d \u2192 `Enter` | OSARA/Jaws says \u201cRendering started\u201d and may give progress indications. |\n| **8. Await completion** | Wait while rendering proceeds. | \u2014 | After rendering finishes, OSARA/Jaws will notify \u201cRender completed\u201d and might announce file path. |\n\n---\n\n## Extra Tips\n\n- **Check loudness/clipping** beforehand: If your project\u2019s levels are peaking above 0 dB, the rendered WAV may clip. Lower track or master volume if needed.  \n- **Rendering single track vs master mix**: If exporting just the audio on one track with its effects etc., use \u201cStems (selected tracks)\u201d. For full mix, use \u201cMaster mix.\u201d  \n- **Keep your sample rate consistent**: Pick the same rate you used for recording or your project settings to avoid quality loss.\n\n---\n\nIf you tell me your version of REAPER, and whether you're using OSARA\u2019s keymap or custom, I can send you an exact set of keystrokes for your setup. Do you want that?"
    }
]